ISO2-70mV/42R

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Wirelessly configurable RTD to 0/10V converter in chip format

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Digital signal adapter to relay output

Pt100 temperature sensor converter Output: 0/10V.

Pulse number multiplier

RS232 to TTL/CMOS Bi-directional Converter (5V)

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Voltage/current/potentiometer to frequency converter, or PWM

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Power supply-DC/DC converter.

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Arithmetic converter adder or subtractor

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Wall temperature sensors

Generator - simulator of PROCESS electrical signals.

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

2 channels of Logic Function (+) OR of 2 signals

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Multiplexer that statically switches 8 channels 0-4/20mA

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Logical function (X,+) AND, OR of 4 signals

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Encoder rotation direction discriminator, with a - b channels

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Isolated multiplexer of 8 thermocouples to one thermocouple output

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Safety relay to protect power systems. 230VAC for 400VAC errors

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Pulse absence detector relay (rotation, jams, ..)

AC/DC current relay (16A). Overload and underload., 2 relays

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Voltage output converter with amplified current

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Pulse Width Amplitude Shaper (T.on)

Universal 3-way galvanic isolator output V (Ballasts)

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

AC/DC Single Phase Power Analyzer (TRMS)

4-20 mA SIGNAL READER.

Converter for averaging 4 RTD signals to 4/20mA

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

16-channel 0-4/20mA multiplexer, to RS485 Modbus

4/20mA RTD Duplicator-Isolator (Active/Passive)

Isolated pulse frequency converter (0.01 to 100 KHz.)

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Multiplexer that statically switches 16 channels 0-4/20mA

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Adapts digital signals from one type and/or level to another.

Multiplexer that statically switches 16 0/10V channels

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Multiplexer of 8 digital signals to RS485

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

RS232 - RS485 - RS232 isolator-repeater converter

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Universal PTC trip temperature protection relay

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

4 Pt100 sensor controller with 2 relay alarms