DUPLO 10

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

8-channel opto-isolated digital adapter

Voltage/current/potentiometer to frequency converter, or PWM

Variable generator with 8 independent 0-4/20mA channels

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Isolated multiplexer of 8 thermocouples to one thermocouple output

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

7 channel digital signal adapter to relay output

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

12-bit - 16-BIT analog/digital converter.

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Pulse absence detector relay (rotation, jams, ..)

Adapts and DUPLICATEs digital signals from one type and/or level to another

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

4/20mA RTD Duplicator-Isolator (Active/Passive)

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Safety relay to protect power systems. 230VAC for 400VAC errors

2-intensity deviation current relay at the input

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Converter with input: 4/20mA (active/passive), output: Ethernet (TCPServer, UDP, MQTT..)

True RMS AC/DC universal voltage and current isolator

AC/DC Single Phase Power Analyzer (TRMS)

Universal PTC trip temperature protection relay

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Pulse number multiplier

RS232 - RS485 - RS232 isolator-repeater converter

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Pulse Width Amplitude Shaper (T.on)

4-20 mA SIGNAL READER.

GSM (4G) Wireless Iiot Gateway Mobile App

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Converter for averaging 4 RTD signals to 4/20mA

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

2 channels of Logic Function (+) OR of 2 signals

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Digital signal adapter to relay output

USB to RS232/485 Bi-Directional Isolator Converter

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Isolated pulse frequency converter (0.01 to 100 KHz.)

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Encoder rotation direction discriminator, with a - b channels

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Solid state relay (AC) 32A with radiator rail

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

AC/DC Power Supply - DC/DC Converter 20W

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Multifunction timer relay

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Multiplexer of 8 digital signals to RS485

Pt100 temperature sensor converter Output: 0/10V.

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Multiplexer that statically switches 16 0/10V channels

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *