AMPER 2 Relay

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Isolated multiplexer of 8 thermocouples to one thermocouple output

Solid state relay (AC) 32A with radiator rail

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Logical function (X,+) AND, OR of 4 signals

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

4-20 mA SIGNAL READER.

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

AC current relay. Overload/underload.

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Multiplexer that statically switches 16 0/10V channels

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

RS232 Communication Extender-Amplifier-Isolator (Pair)

Arithmetic converter adder or subtractor

Converter for averaging 4 RTD signals to 4/20mA

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

7 channel digital signal adapter to relay output

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

12-bit - 16-BIT analog/digital converter.

Multiplexer of 8 digital signals to RS485

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

USB to RS232 Bi-Directional Converter

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

AC/DC Single Phase Power Analyzer (TRMS)

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Pulse Width Amplitude Shaper (T.on)

Amplifier for proportional solenoid valves, voltage regulation (speed)

RS232 - RS485 - RS232 isolator-repeater converter

Power supply-DC/DC converter.

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Process relay v/i. Digital setpoint numerical preselectors

Variable power supply for laboratory tabletop 0/30V (5A)

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Universal 3-way galvanic isolator output V (Ballasts)

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Converter - isolator for analog signals. RS485 output

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

GSM (4G) Wireless Iiot Gateway Mobile App

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc