VOLTAGE 3F.Relay

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Multiplexer of 8 digital signals to RS485

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Adapts digital signals from one type and/or level to another.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

True RMS AC/DC universal voltage and current isolator

Process relay v/i. Digital setpoint numerical preselectors

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

4 Pt100 sensor controller with 2 relay alarms

Variable generator with 8 independent 0-4/20mA channels

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Divisor - pulse counter by an integer (1.. 999).

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Variable power supply for laboratory tabletop 0/30V (5A)

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Pulse number multiplier

12-bit digital/analog converter.

4/20mA RTD Duplicator-Isolator (Active/Passive)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Power supply-DC/DC converter.

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

2 channels of Logic Function (+) OR of 2 signals

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

AC/DC Single Phase Power Analyzer (TRMS)

RS232 to TTL/CMOS Bi-directional Converter (5V)

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

AC/DC current relay (16A). Overload and underload., 2 relays

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Isolated pulse frequency converter (0.01 to 100 KHz.)

Safety relay to protect power systems. 230VAC for 400VAC errors

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Logical function (X,+) AND, OR of 4 signals

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

2-intensity deviation current relay at the input

RS232 - RS485 - RS232 isolator-repeater converter

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Multiplexer that statically switches 16 0/10V channels

Amplifier for proportional solenoid valves, voltage regulation (speed)

Generator - simulator of PROCESS electrical signals.

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

8-channel opto-isolated digital adapter

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

AC current relay. Overload/underload.

Converter - isolator for analog signals. RS485 output

Detection and monitoring of supply voltage failure of up to 21 signals.

Multifunction timer relay

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Isolated multiplexer of 8 thermocouples to one thermocouple output

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

7 channel digital signal adapter to relay output

Universal PTC trip temperature protection relay