AMPLI-V150

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

GSM (4G) Wireless Iiot Gateway Mobile App

4-20 mA SIGNAL READER.

Converter for averaging 4 RTD signals to 4/20mA

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Voltage output converter with amplified current

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Multifunction timer relay

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Variable power supply for laboratory tabletop 0/30V (5A)

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

2 channels of Logic Function (+) OR of 2 signals

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Solid state relay (AC) 32A with radiator rail

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

RS232 to TTL/CMOS Bi-directional Converter (5V)

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Generator - simulator of PROCESS electrical signals.

Pt100 temperature sensor converter Output: 0/10V.

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

AC/DC current relay (16A). Overload and underload., 2 relays

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

AC/DC Single Phase Power Analyzer (TRMS)

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Variable generator with 8 independent 0-4/20mA channels

AC current relay. Overload/underload.

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

RS232 Communication Extender-Amplifier-Isolator (Pair)

Multiplexer that statically switches 8 channels 0-4/20mA

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Safety relay to protect power systems. 230VAC for 400VAC errors

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Converter - isolator for analog signals. RS485 output

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Divisor - pulse counter by an integer (1.. 999).

Power supply-DC/DC converter.

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Universal 3-way galvanic isolator output V (Ballasts)

Process relay v/i. Digital setpoint numerical preselectors

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Wirelessly configurable RTD to 0/10V converter in chip format

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Adapts digital signals from one type and/or level to another.

USB to RS232 Bi-Directional Converter

Isolated multiplexer of 8 thermocouples to one thermocouple output

16-channel 0-4/20mA multiplexer, to RS485 Modbus

4/20mA RTD Duplicator-Isolator (Active/Passive)

Encoder rotation direction discriminator, with a - b channels

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Universal PTC trip temperature protection relay

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)