OFI-RTD-IN

4/20mA RTD Duplicator-Isolator (Active/Passive)

AC current relay. Overload/underload.

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

2 channels of Logic Function (+) OR of 2 signals

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Analogue-digital humidity and temperature controller sensor with LED signalling, relay alarm, for indoor use.

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Digital signal adapter to relay output

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Indoor or outdoor wall-mounted temperature sensors, with Pt100 signal, 4-20 mA, 0-10 Vdc, with or without display

Adapts and DUPLICATEs digital signals from one type and/or level to another

AC/DC Power Supply - DC/DC Converter 20W

Isolated multiplexer of 8 thermocouples to one thermocouple output

Isolated pulse frequency converter (0.01 to 100 KHz.)

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Power supply-DC/DC converter.

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

12-bit digital/analog converter.

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Adjustable industrial thermostat.

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Wall temperature sensors

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Universal PTC trip temperature protection relay

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Converter for averaging 4 RTD signals to 4/20mA

Analogue-digital CO2, humidity and temperature controller sensor with LED signalling and relay alarm, for indoor use.

True RMS AC/DC universal voltage and current isolator

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

USB to RS232/485 Bi-Directional Isolator Converter

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Indoor CO2, humidity and temperature sensor with RS485 ModBus communication

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Divisor - pulse counter by an integer (1.. 999).

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

4 Pt100 sensor controller with 2 relay alarms

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Multiplexer that statically switches 16 0/10V channels

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Safety relay to protect power systems. 230VAC for 400VAC errors

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Amplifier for proportional solenoid valves, voltage regulation (speed)

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Voltage/current/potentiometer to frequency converter, or PWM

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Variable generator with 8 independent 0-4/20mA channels

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Detection and monitoring of supply voltage failure of up to 21 signals.

Multiplexer of 8 digital signals to RS485

Solid state relay (AC) 32A with radiator rail

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

4-20 mA SIGNAL READER.

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Process relay v/i. Digital setpoint numerical preselectors

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.