ISO2-DUO-420

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Amplifier for proportional solenoid valves, voltage regulation (speed)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Generator - simulator of PROCESS electrical signals.

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

True RMS AC/DC universal voltage and current isolator

Converter for averaging 4 RTD signals

Divisor - pulse counter by an integer (1.. 999).

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Solid state relay (AC) 32A with radiator rail

Multiplexer that statically switches 8 channels 0-4/20mA

Process relay v/i. Digital setpoint numerical preselectors

Pulse number multiplier

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

AC/DC current relay (16A). Overload and underload., 2 relays

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

7 channel digital signal adapter to relay output

Universal 3-way galvanic isolator output V (Ballasts)

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

4 Pt100 sensor controller with 2 relay alarms

RS232 to TTL/CMOS Bi-directional Converter (5V)

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

12-bit digital/analog converter.

Converter - isolator for analog signals. RS485 output

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

AC current relay. Overload/underload.

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

8-channel opto-isolated digital adapter

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Wirelessly configurable RTD to 0/10V converter in chip format

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Pulse Width Amplitude Shaper (T.on)

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

Multiplexer of 8 digital signals to RS485

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Multiplexer that statically switches 16 channels 0-4/20mA

Converter with input: 4/20mA (active/passive), output: Ethernet (TCPServer, UDP, MQTT..)

Pt100 temperature sensor converter Output: 0/10V.

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Detection and monitoring of supply voltage failure of up to 21 signals.

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

AC/DC Single Phase Power Analyzer (TRMS)

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Isolated pulse frequency converter (0.01 to 100 KHz.)

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

USB to RS232/485 Bi-Directional Isolator Converter

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Wall temperature sensors

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

RS232 - RS485 - RS232 isolator-repeater converter

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Encoder rotation direction discriminator, with a - b channels

Voltage output converter with amplified current

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.