DUPLO 20-IN

Digital signal adapter to relay output

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

AC/DC Power Supply - DC/DC Converter 20W

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

USB to RS232 Bi-Directional Converter

Voltage/current/potentiometer to frequency converter, or PWM

Solid state relay (AC) 32A with radiator rail

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Converter for averaging 4 RTD signals

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

4/20mA RTD Duplicator-Isolator (Active/Passive)

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Isolated multiplexer of 8 thermocouples to one thermocouple output

Safety relay to protect power systems. 230VAC for 400VAC errors

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Variable power supply for laboratory tabletop 0/30V (5A)

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

4-20 mA SIGNAL READER.

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Converter - isolator for analog signals. RS485 output

2-intensity deviation current relay at the input

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Adapts and DUPLICATEs digital signals from one type and/or level to another

AC/DC Single Phase Power Analyzer (TRMS)

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

True RMS AC/DC universal voltage and current isolator

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Converter for averaging 4 RTD signals to 4/20mA

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Universal 3-way galvanic isolator output V (Ballasts)

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

USB to RS232/485 Bi-Directional Isolator Converter

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

AC current relay. Overload/underload.

Multiplexer that statically switches 8 channels 0-4/20mA

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

RS232 to TTL/CMOS Bi-directional Converter (5V)

12-bit digital/analog converter.

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Logical function (X,+) AND, OR of 4 signals

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Multiplexer that statically switches 16 channels 0-4/20mA

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

12-bit - 16-BIT analog/digital converter.

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Pulse Width Amplitude Shaper (T.on)

Multiplexer that statically switches 16 0/10V channels

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

8-channel opto-isolated digital adapter