MUXi16.RS4

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

RS232 - RS485 - RS232 isolator-repeater converter

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Pulse absence detector relay (rotation, jams, ..)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

AC current relay. Overload/underload.

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

2 channels of Logic Function (+) OR of 2 signals

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

12-bit - 16-BIT analog/digital converter.

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

AC/DC Single Phase Power Analyzer (TRMS)

Converter for averaging 4 RTD signals to 4/20mA

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

True RMS AC/DC universal voltage and current isolator

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

7 channel digital signal adapter to relay output

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Voltage/current/potentiometer to frequency converter, or PWM

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

USB to RS232 Bi-Directional Converter

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Arithmetic converter adder or subtractor

Variable power supply for laboratory tabletop 0/30V (5A)

Adapts and DUPLICATEs digital signals from one type and/or level to another

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

USB to RS232/485 Bi-Directional Isolator Converter

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Converter - isolator for analog signals. RS485 output

Multiplexer that statically switches 16 channels 0-4/20mA

Multiplexer of 8 digital signals to RS485

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Detection and monitoring of supply voltage failure of up to 21 signals.

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

AC/DC Power Supply - DC/DC Converter 20W

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Universal PTC trip temperature protection relay

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

4-20 mA SIGNAL READER.

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

AC/DC current relay (16A). Overload and underload., 2 relays

RS232 to TTL/CMOS Bi-directional Converter (5V)

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Variable generator with 8 independent 0-4/20mA channels

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Multifunction timer relay

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Isolated pulse frequency converter (0.01 to 100 KHz.)

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Amplifier for proportional solenoid valves, voltage regulation (speed)

Converter for averaging 4 RTD signals

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply