NOPUL

Adapts digital signals from one type and/or level to another.

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Encoder rotation direction discriminator, with a - b channels

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Pulse absence detector relay (rotation, jams, ..)

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Divisor - pulse counter by an integer (1.. 999).

12-bit - 16-BIT analog/digital converter.

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

USB to RS232 Bi-Directional Converter

Pulse Width Amplitude Shaper (T.on)

Voltage/current/potentiometer to frequency converter, or PWM

4-20 mA SIGNAL READER.

7 channel digital signal adapter to relay output

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolated pulse frequency converter (0.01 to 100 KHz.)

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Logical function (X,+) AND, OR of 4 signals

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

RS232 - RS485 - RS232 isolator-repeater converter

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Converter - isolator for analog signals. RS485 output

Voltage output converter with amplified current

Wirelessly configurable RTD to 0/10V converter in chip format

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Process relay v/i. Digital setpoint numerical preselectors

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

AC/DC current relay (16A). Overload and underload., 2 relays

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

RS232 Communication Extender-Amplifier-Isolator (Pair)

Solid state relay (AC) 32A with radiator rail

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Safety relay to protect power systems. 230VAC for 400VAC errors

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Universal PTC trip temperature protection relay

Isolated multiplexer of 8 thermocouples to one thermocouple output

12-bit digital/analog converter.

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Voltage supervisory relay (VDC). Overvoltage and undervoltage

GSM (4G) Wireless Iiot Gateway Mobile App

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Universal 3-way galvanic isolator output V (Ballasts)

Variable power supply for laboratory tabletop 0/30V (5A)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Multiplexer that statically switches 16 0/10V channels

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Converter for averaging 4 RTD signals to 4/20mA

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

2-intensity deviation current relay at the input

USB to RS232/485 Bi-Directional Isolator Converter

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Multiplexer of 8 digital signals to RS485

Arithmetic converter adder or subtractor

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Digital signal adapter to relay output

True RMS AC/DC universal voltage and current isolator

Multiplexer that statically switches 16 channels 0-4/20mA

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO