ISO2-420

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Isolated multiplexer of 8 thermocouples to one thermocouple output

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Encoder rotation direction discriminator, with a - b channels

Safety relay to protect power systems. 230VAC for 400VAC errors

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Divisor - pulse counter by an integer (1.. 999).

Voltage/current/potentiometer to frequency converter, or PWM

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Arithmetic converter adder or subtractor

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Multifunction timer relay

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

AC/DC current relay (16A). Overload and underload., 2 relays

Digital signal adapter to relay output

Variable power supply for laboratory tabletop 0/30V (5A)

AC/DC Single Phase Power Analyzer (TRMS)

Isolated pulse frequency converter (0.01 to 100 KHz.)

2 channels of Logic Function (+) OR of 2 signals

Power supply-DC/DC converter.

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Pt100 temperature sensor converter Output: 0/10V.

Variable generator with 8 independent 0-4/20mA channels

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

4 Pt100 sensor controller with 2 relay alarms

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Amplifier for proportional solenoid valves, voltage regulation (speed)

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Adapts digital signals from one type and/or level to another.

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Voltage output converter with amplified current

2-intensity deviation current relay at the input

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

USB to RS232 Bi-Directional Converter

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Pulse absence detector relay (rotation, jams, ..)

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Wirelessly configurable RTD to 0/10V converter in chip format

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

4/20mA RTD Duplicator-Isolator (Active/Passive)

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Converter for averaging 4 RTD signals to 4/20mA

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

12-bit - 16-BIT analog/digital converter.

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

12-bit digital/analog converter.

AC/DC Power Supply - DC/DC Converter 20W

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Pulse number multiplier

7 channel digital signal adapter to relay output

AC current relay. Overload/underload.

Multiplexer that statically switches 8 channels 0-4/20mA

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

True RMS AC/DC universal voltage and current isolator

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Voltage supervisory relay (VDC). Overvoltage and undervoltage