ISO-DUO-M/42

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Digital signal adapter to relay output

Universal 3-way galvanic isolator output V (Ballasts)

GSM (4G) Wireless Iiot Gateway Mobile App

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

2 channels of Logic Function (+) OR of 2 signals

Converter with input: 4/20mA (active/passive), output: Ethernet (TCPServer, UDP, MQTT..)

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

Detection and monitoring of supply voltage failure of up to 21 signals.

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Logical function (X,+) AND, OR of 4 signals

Pt100 temperature sensor converter Output: 0/10V.

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Isolated multiplexer of 8 thermocouples to one thermocouple output

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

RS232 to TTL/CMOS Bi-directional Converter (5V)

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Divisor - pulse counter by an integer (1.. 999).

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Wirelessly configurable RTD to 0/10V converter in chip format

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Universal PTC trip temperature protection relay

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Wall temperature sensors

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

USB to RS232/485 Bi-Directional Isolator Converter

Safety relay to protect power systems. 230VAC for 400VAC errors

Variable power supply for laboratory tabletop 0/30V (5A)

Power supply-DC/DC converter.

Multiplexer of 8 digital signals to RS485

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Variable generator with 8 independent 0-4/20mA channels

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

4-20 mA SIGNAL READER.

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Multiplexer that statically switches 16 channels 0-4/20mA

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Pulse Width Amplitude Shaper (T.on)

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Multifunction timer relay

Pulse absence detector relay (rotation, jams, ..)

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

4/20mA RTD Duplicator-Isolator (Active/Passive)

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A