ISO2-V/42R

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Voltage output converter with amplified current

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Pt100 temperature sensor converter Output: 0/10V.

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Universal 3-way galvanic isolator output V (Ballasts)

Isolated pulse frequency converter (0.01 to 100 KHz.)

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Solid state relay (AC) 32A with radiator rail

4/20mA RTD Duplicator-Isolator (Active/Passive)

AC/DC Power Supply - DC/DC Converter 20W

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

AC current relay. Overload/underload.

Multiplexer that statically switches 16 0/10V channels

Isolated multiplexer of 8 thermocouples to one thermocouple output

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Converter for averaging 4 RTD signals

True RMS AC/DC universal voltage and current isolator

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

7 channel digital signal adapter to relay output

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Pulse Width Amplitude Shaper (T.on)

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

USB to RS232 Bi-Directional Converter

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Converter - isolator for analog signals. RS485 output

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

2-intensity deviation current relay at the input

Pulse number multiplier

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Amplifier for proportional solenoid valves, voltage regulation (speed)

Pulse absence detector relay (rotation, jams, ..)

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Safety relay to protect power systems. 230VAC for 400VAC errors

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

RS232 Communication Extender-Amplifier-Isolator (Pair)

8-channel opto-isolated digital adapter

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Arithmetic converter adder or subtractor

Detection and monitoring of supply voltage failure of up to 21 signals.

16-channel 0-4/20mA multiplexer, to RS485 Modbus

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

USB to RS232/485 Bi-Directional Isolator Converter

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Logical function (X,+) AND, OR of 4 signals

Universal PTC trip temperature protection relay

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Encoder rotation direction discriminator, with a - b channels

Adapts and DUPLICATEs digital signals from one type and/or level to another

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

12-bit - 16-BIT analog/digital converter.

Voltage/current/potentiometer to frequency converter, or PWM

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

12-bit digital/analog converter.

Wall temperature sensors

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

2 channels of Logic Function (+) OR of 2 signals

Multiplexer of 8 digital signals to RS485

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

GSM (4G) Wireless Iiot Gateway Mobile App

Multifunction timer relay

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Divisor - pulse counter by an integer (1.. 999).