OFI-RTD-IN-minidis

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Indoor humidity and temperature sensor with RS485 ModBus communication

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

16-channel 0-4/20mA multiplexer, to RS485 Modbus

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

4 Pt100 sensor controller with 2 relay alarms

Indoor CO2, humidity and temperature sensor with RS485 ModBus communication

Arithmetic converter adder or subtractor

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

COUNTER indicator, 32 x 74 format. Input for encoders, inductive detectors, contacts,....

Variable power supply for laboratory tabletop 0/30V (5A)

AC/DC Single Phase Power Analyzer (TRMS)

Digital signal adapter to relay output

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Isolated multiplexer of 8 thermocouples to one thermocouple output

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Isolated pulse frequency converter (0.01 to 100 KHz.)

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Voltage/current/potentiometer to frequency converter, or PWM

USB to RS232 Bi-Directional Converter

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Pulse number multiplier

Adapts digital signals from one type and/or level to another.

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Safety relay to protect power systems. 230VAC for 400VAC errors

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Wall temperature sensors

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

AC/DC current relay (16A). Overload and underload., 2 relays

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Wirelessly configurable RTD to 0/10V converter in chip format

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Multiplexer that statically switches 16 channels 0-4/20mA

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

4/20mA RTD Duplicator-Isolator (Active/Passive)

Detection and monitoring of supply voltage failure of up to 21 signals.

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

AC current relay. Overload/underload.

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Analogue-digital CO2, humidity and temperature controller sensor with LED signalling and relay alarm, for indoor use.

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Adapts and DUPLICATEs digital signals from one type and/or level to another

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Controller - universal panel indicator 32 x 74 Double display, PT100 input, Thermocouple, V, I, mV

Process indicator format 32 x 74, Pt100 input - Thermocouple - mA - Vcc - potentiometer, 24...230 V power supply

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

4-20 mA SIGNAL READER.

CHRONOMETER indicator, 32 x 74 format. Simple or cyclic timer. Precision timer

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

RS232 Communication Extender-Amplifier-Isolator (Pair)

Universal PTC trip temperature protection relay

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case