RTD-DUPLO-20

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Converter for averaging 4 RTD signals to 4/20mA

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Universal 3-way galvanic isolator output V (Ballasts)

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Encoder rotation direction discriminator, with a - b channels

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Multiplexer that statically switches 8 channels 0-4/20mA

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Wirelessly configurable RTD to 0/10V converter in chip format

4 Pt100 sensor controller with 2 relay alarms

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

2 channels of Logic Function (+) OR of 2 signals

Pulse number multiplier

2-intensity deviation current relay at the input

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

4-20 mA SIGNAL READER.

Voltage/current/potentiometer to frequency converter, or PWM

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Arithmetic converter adder or subtractor

Logical function (X,+) AND, OR of 4 signals

Adapts and DUPLICATEs digital signals from one type and/or level to another

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Amplifier for proportional solenoid valves, voltage regulation (speed)

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Power supply-DC/DC converter.

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

RS232 - RS485 - RS232 isolator-repeater converter

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Voltage output converter with amplified current

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Digital signal adapter to relay output

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

AC/DC current relay (16A). Overload and underload., 2 relays

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Process relay v/i. Digital setpoint numerical preselectors

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

True RMS AC/DC universal voltage and current isolator

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

AC/DC Single Phase Power Analyzer (TRMS)

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Generator - simulator of PROCESS electrical signals.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Multifunction timer relay

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Variable power supply for laboratory tabletop 0/30V (5A)

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

USB to RS232/485 Bi-Directional Isolator Converter

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Variable generator with 8 independent 0-4/20mA channels

RS232 to TTL/CMOS Bi-directional Converter (5V)

RS232 Communication Extender-Amplifier-Isolator (Pair)

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

8-channel opto-isolated digital adapter

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.