POSI Plus

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Process relay v/i. Digital setpoint numerical preselectors

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Multiplexer of 8 digital signals to RS485

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Wirelessly configurable RTD to 0/10V converter in chip format

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

2 channels of Logic Function (+) OR of 2 signals

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Multiplexer that statically switches 16 0/10V channels

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Pulse Width Amplitude Shaper (T.on)

USB to RS232/485 Bi-Directional Isolator Converter

Multiplexer that statically switches 16 channels 0-4/20mA

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

12-bit digital/analog converter.

Adapts and DUPLICATEs digital signals from one type and/or level to another

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Universal PTC trip temperature protection relay

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Detection and monitoring of supply voltage failure of up to 21 signals.

4-20 mA SIGNAL READER.

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Safety relay to protect power systems. 230VAC for 400VAC errors

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Encoder rotation direction discriminator, with a - b channels

AC/DC current relay (16A). Overload and underload., 2 relays

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Multifunction timer relay

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Solid state relay (AC) 32A with radiator rail

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Logical function (X,+) AND, OR of 4 signals

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Voltage output converter with amplified current

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

RS232 to TTL/CMOS Bi-directional Converter (5V)

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Variable generator with 8 independent 0-4/20mA channels

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

4/20mA RTD Duplicator-Isolator (Active/Passive)

Pulse number multiplier

RS232 - RS485 - RS232 isolator-repeater converter

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Amplifier for proportional solenoid valves, voltage regulation (speed)

Digital signal adapter to relay output

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

4 Pt100 sensor controller with 2 relay alarms

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated