DPF EE160

The BPSE load cell is used to measure compression forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.

Combined humidity and temperature sensor, high quality sensor, duct and outdoor.

Wire displacement sensor, ranges from 1000 mm to 4000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

Range of temperature sensors with cable output, Pt100, Pt1000, thermocouples, NTC, PTC.

Submersible pressure level sensor, up to 150 meters of water column

Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

Solar radiation sensor, pyranometer

Indoor CO2 sensor, range up to 4000 ppm, analog output and digital alarm

Range of resistive displacement sensors, with different mounting options, with a range from 10 mm to 200 mm.

Anemometer with pulse output, proportional to wind speed, industrial use

INCLINOMETER RANGE (±) 10°/30°/60° /90°/ To be specified, 1 or 2 axes, ACCURACY: ±0.02º, RESOLUTION:0.05º

Tilt sensor for platform control, 1 or 2 axes, programmable alarm range, range +-15º, accuracy 0.1º, 1Amp contact, NC or NA, 24 Vdc power supply, IP67

Industrial resistive displacement sensor, range from 50 mm to 1250 mm

Precision tilt sensor with ranges from ±1...90º, 2 axes, output signal 4-20mA / 0-5 Vdc / RS485 / CanBus, ACCURACY: ±0.005º, RESOLUTION: 0.001º

Industrial inclinometer. Range 10º to 360º, 1 and 2 axes, Output signal 0.5-4.5 Vdc. / 4...20 mA, CAN / RS485/ TTL / 422, Power supply 9...36 Vdc, IP67, Working temp. -40...+85ºC, accuracy ±0.2º

Wire displacement sensor, ranges from 100 mm to 1250 mm, with 5 Kohm resistance output signal, 0-5/10 Vdc, 4-20 mA, RS485 or pulse, optionally with IP67 environmental protection. Robust

NDIR sensor CO2 controller (4000 ppm) RS485 output with LED signaling

Load cell for strain measurement on 3 axes, design-based average range, output signal 2 mV/Vx axis

High precision tilt measurement equipment on 1 or 2 axes, range +-15º, precision 0.005º, resolution 0.001º

Optical rain sensor

Anemometer with direct alarm output (adjustable) with relay switching contact. Also available with 4...20 mA output.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.

Accelerometer with 3 axes, the output signal can be in mA, Vcc and RS485 communication

SENSORS FOR EDDY CURRENT DISPLACEMENT MEASUREMENT, RANGES 1-2-4-5 mm, output signal 4-20 mA - 0-10 Vdc, RS485

Ultrasonic level sensor, range up to 10 meters, output signal RS485/ 4-20 mA / 0-5 Vdc.

Wind direction sensor for industrial use, with 4-20 mA output signal

Indoor or outdoor wall-mounted temperature sensors, with Pt100 signal, 4-20 mA, 0-10 Vdc, with or without display

Combined wind speed and direction sensor

HIGH PRECISION RANGE ±1...90º, 2 axes, output signal 4-20mA / 0-5 Vdc / Rs485 / CanBus, PRECISION: ±0.005º, RESOLUTION: 0.001º

Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

Radar level measurement for dams and open channels

Field transmitters for measuring concentration of different types of gases. With alarm, light signal and use in ATEX zones. For INDOOR - OUTDOOR

CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication

Dust concentration sensor

Radar level sensor, range up to 10 meters.

Compact ultrasound stations, RS485 ModBus communication

Temperature, humidity and/or atmospheric pressure sensor

TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Wire displacement sensor, miniature size, ranges from 100 to 350 mm

Indoor CO2, humidity and temperature sensor with RS485 ModBus communication

Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses

Displacement sensor range from 10 to 100 mm, with and without spring probe, IP67

Analog-digital CO2 Controller Sensor, with ModBus RS485 communication, for OUTDOORS

Indoor CO2 sensor, range up to 4000 ppm, analog output and relay alarm

Temperature and humidity transmitter. For ambient and duct. Output signal 4-20 mA, 0-10 vdc and RS485

Illuminance sensor, luxmeter, measuring range: 0-2000lux / 0-20klux / 0-200klux

Vortex flowmeter with temperature and pressure compensation

Differential pressure transmitter. Measuring range up to 3MPa (30 Bar)

Indoor humidity and temperature sensor with RS485 ModBus communication

Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.

Wire displacement sensor, miniature size, ranges 250, 500, 750, 1000 mm

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Analogue-digital CO2, humidity and temperature controller sensor with LED signalling and relay alarm, for indoor use.

LVDT displacement sensor, pencil type, 8 mm diameter, repeatability better than 1 micron, ranges 2.5, 5 and 10 mm.

Wind speed sensor, industrial anemometer made of metal or carbon fiber, with different types of output signals

Luminosity sensors (luxometers) for industrial and home automation use

Wind direction sensor

General purpose displacement sensor, spring loaded probe, ranges up to 200 mm, resistance up to 5 Kohm

Industrial pressure sensor, -1.0 /…2.5 /0…6 /0…10 /…16 /0…25 /0…60 /… 100 /…250 /…400 /….600 Bar, 4-20 mA output, via M12 connector, 1/4" thread

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Analogue-digital humidity and temperature controller sensor with LED signalling, relay alarm, for indoor use.

Adjustable industrial thermostat.

Rain and/or snow detector

LVDT displacement sensor, ranges from 10 to 40 mm, with or without probe, with separate electronics.

Universal traction-compression load cell, from 15 to 5000 kg. 2 mv/v.

Anti-solar radiation protector

Rocker rain gauge

Equipment for measuring inclination in 1 or 2 axes, color LCD screen, battery or USB powered, range +-90º, accuracy 0.05%, magnet fixing.

Static torque sensor, ranges up to 10000 Nm, with 2mv/v output signal

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Inclinometer with RS485 output, temperature-compensated, high precision. 1 or 2 axes. Temperature-compensated.