AQUA-RTD-IN-minidis

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

12-bit digital/analog converter.

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Multiplexer that statically switches 16 channels 0-4/20mA

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Solid state relay (AC) 32A with radiator rail

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Converter for averaging 4 RTD signals

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Temperature and humidity transmitter. For ambient and duct. Output signal 4-20 mA, 0-10 vdc and RS485

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

GSM (4G) Wireless Iiot Gateway Mobile App

Analogue-digital CO2, humidity and temperature controller sensor with LED signalling and relay alarm, for indoor use.

Pulse absence detector relay (rotation, jams, ..)

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

4-20 mA SIGNAL READER.

Isolated pulse frequency converter (0.01 to 100 KHz.)

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

RS232 - RS485 - RS232 isolator-repeater converter

Safety relay to protect power systems. 230VAC for 400VAC errors

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Process relay v/i. Digital setpoint numerical preselectors

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Range of temperature sensors with cable output, Pt100, Pt1000, thermocouples, NTC, PTC.

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

8-channel opto-isolated digital adapter

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Isolated multiplexer of 8 thermocouples to one thermocouple output

Regulator for electromagnetic vibrators 2, 3, 10 Amp

CHRONOMETER indicator, 32 x 74 format. Simple or cyclic timer. Precision timer

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

4 Pt100 sensor controller with 2 relay alarms

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

RS232 to TTL/CMOS Bi-directional Converter (5V)

Process indicator format 32 x 74, Pt100 input - Thermocouple - mA - Vcc - potentiometer, 24...230 V power supply

Universal 3-way galvanic isolator output V (Ballasts)

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Multiplexer that statically switches 8 channels 0-4/20mA

Universal programmable tachometer - frequency meter with dual indication.

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Pt100 temperature sensor converter Output: 0/10V.

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Voltage/current/potentiometer to frequency converter, or PWM

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

USB to RS232/485 Bi-Directional Isolator Converter

Pulse number multiplier

7 channel digital signal adapter to relay output

Multifunction timer relay

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

AC/DC Single Phase Power Analyzer (TRMS)

RS232 Communication Extender-Amplifier-Isolator (Pair)

Adjustable industrial thermostat.

2-intensity deviation current relay at the input

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Encoder rotation direction discriminator, with a - b channels

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Controller - universal panel indicator 32 x 74 Double display, PT100 input, Thermocouple, V, I, mV

True RMS AC/DC universal voltage and current isolator

2 channels of Logic Function (+) OR of 2 signals

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Voltage output converter with amplified current

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Amplifier for proportional solenoid valves, voltage regulation (speed)

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.