ECO-TTL

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

GSM (4G) Wireless Iiot Gateway Mobile App

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Universal PTC trip temperature protection relay

Multiplexer that statically switches 8 channels 0-4/20mA

Pulse Width Amplitude Shaper (T.on)

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Generator - simulator of PROCESS electrical signals.

Divisor - pulse counter by an integer (1.. 999).

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

USB to RS232 Bi-Directional Converter

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Adapts digital signals from one type and/or level to another.

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

AC/DC Power Supply - DC/DC Converter 20W

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Safety relay to protect power systems. 230VAC for 400VAC errors

Voltage output converter with amplified current

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Multiplexer that statically switches 16 channels 0-4/20mA

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

8-channel opto-isolated digital adapter

RS232 to TTL/CMOS Bi-directional Converter (5V)

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

AC current relay. Overload/underload.

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Converter for averaging 4 RTD signals

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Detection and monitoring of supply voltage failure of up to 21 signals.

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Arithmetic converter adder or subtractor

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

2-intensity deviation current relay at the input

Adapts and DUPLICATEs digital signals from one type and/or level to another

Process relay v/i. Digital setpoint numerical preselectors

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Wirelessly configurable RTD to 0/10V converter in chip format

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Isolated multiplexer of 8 thermocouples to one thermocouple output

Multiplexer of 8 digital signals to RS485

AC/DC current relay (16A). Overload and underload., 2 relays

Voltage/current/potentiometer to frequency converter, or PWM

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

12-bit - 16-BIT analog/digital converter.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

4-20 mA SIGNAL READER.

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Isolated pulse frequency converter (0.01 to 100 KHz.)

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Amplifier for proportional solenoid valves, voltage regulation (speed)

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Converter for averaging 4 RTD signals to 4/20mA

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.