ISO-DUO-10

Logical function (X,+) AND, OR of 4 signals

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

True RMS AC/DC universal voltage and current isolator

Detection and monitoring of supply voltage failure of up to 21 signals.

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

12-bit - 16-BIT analog/digital converter.

Wall temperature sensors

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Universal PTC trip temperature protection relay

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Safety relay to protect power systems. 230VAC for 400VAC errors

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

4 Pt100 sensor controller with 2 relay alarms

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

4/20mA RTD Duplicator-Isolator (Active/Passive)

AC/DC current relay (16A). Overload and underload., 2 relays

Process relay v/i. Digital setpoint numerical preselectors

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Pulse absence detector relay (rotation, jams, ..)

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Voltage/current/potentiometer to frequency converter, or PWM

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

4-20 mA SIGNAL READER.

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

USB to RS232/485 Bi-Directional Isolator Converter

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Isolated pulse frequency converter (0.01 to 100 KHz.)

AC current relay. Overload/underload.

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

Converter with input: 4/20mA (active/passive), output: Ethernet (TCPServer, UDP, MQTT..)

Wirelessly configurable RTD to 0/10V converter in chip format

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Regulator for electromagnetic vibrators 2, 3, 10 Amp

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Generator - simulator of PROCESS electrical signals.

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Pulse Width Amplitude Shaper (T.on)

Voltage output converter with amplified current

Multiplexer that statically switches 16 channels 0-4/20mA

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Multiplexer that statically switches 8 channels 0-4/20mA

2-intensity deviation current relay at the input

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Adapts and DUPLICATEs digital signals from one type and/or level to another

RS232 to TTL/CMOS Bi-directional Converter (5V)

RS232 - RS485 - RS232 isolator-repeater converter

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Multiplexer that statically switches 16 0/10V channels

GSM (4G) Wireless Iiot Gateway Mobile App

AC/DC Single Phase Power Analyzer (TRMS)

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe