ADAPTA Namur – ADAPTA Duo Namur

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Safety relay to protect power systems. 230VAC for 400VAC errors

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Wirelessly configurable RTD to 0/10V converter in chip format

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

AC current relay. Overload/underload.

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Voltage output converter with amplified current

AC/DC Single Phase Power Analyzer (TRMS)

Pulse absence detector relay (rotation, jams, ..)

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Logical function (X,+) AND, OR of 4 signals

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

7 channel digital signal adapter to relay output

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Converter - isolator for analog signals. RS485 output

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

4 Pt100 sensor controller with 2 relay alarms

4/20mA RTD Duplicator-Isolator (Active/Passive)

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

2 channels of Logic Function (+) OR of 2 signals

AC/DC Power Supply - DC/DC Converter 20W

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Pulse number multiplier

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Converter for averaging 4 RTD signals to 4/20mA

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Universal 3-way galvanic isolator output V (Ballasts)

Pt100 temperature sensor converter Output: 0/10V.

AC/DC current relay (16A). Overload and underload., 2 relays

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Multiplexer that statically switches 16 0/10V channels

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Variable power supply for laboratory tabletop 0/30V (5A)

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Universal PTC trip temperature protection relay

Encoder rotation direction discriminator, with a - b channels

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Arithmetic converter adder or subtractor

Divisor - pulse counter by an integer (1.. 999).

12-bit digital/analog converter.

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

USB to RS232/485 Bi-Directional Isolator Converter

RS232 - RS485 - RS232 isolator-repeater converter

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Multifunction timer relay

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Adapts digital signals from one type and/or level to another.

GSM (4G) Wireless Iiot Gateway Mobile App

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

2-intensity deviation current relay at the input

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC