ISO3-PAR-mini

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

12-bit - 16-BIT analog/digital converter.

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Encoder rotation direction discriminator, with a - b channels

Pt100 temperature sensor converter Output: 0/10V.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Detection and monitoring of supply voltage failure of up to 21 signals.

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Converter for averaging 4 RTD signals

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

AC/DC current relay (16A). Overload and underload., 2 relays

2-intensity deviation current relay at the input

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

4/20mA RTD Duplicator-Isolator (Active/Passive)

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

4 Pt100 sensor controller with 2 relay alarms

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Voltage/current/potentiometer to frequency converter, or PWM

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

RS232 - RS485 - RS232 isolator-repeater converter

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

USB to RS232/485 Bi-Directional Isolator Converter

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

AC current relay. Overload/underload.

USB to RS232 Bi-Directional Converter

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Voltage output converter with amplified current

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Arithmetic converter adder or subtractor

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Multiplexer that statically switches 16 channels 0-4/20mA

Wall temperature sensors

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Pulse absence detector relay (rotation, jams, ..)

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Adapts and DUPLICATEs digital signals from one type and/or level to another

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

RS232 to TTL/CMOS Bi-directional Converter (5V)

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Generator - simulator of PROCESS electrical signals.

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Amplifier for proportional solenoid valves, voltage regulation (speed)

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Power supply-DC/DC converter.

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Universal PTC trip temperature protection relay

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Pulse Width Amplitude Shaper (T.on)

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

8-channel opto-isolated digital adapter

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Pulse number multiplier

Variable power supply for laboratory tabletop 0/30V (5A)

Digital signal adapter to relay output

Process relay v/i. Digital setpoint numerical preselectors

Variable generator with 8 independent 0-4/20mA channels

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)