ENERGY-PLUS

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

USB to RS232 Bi-Directional Converter

12-bit - 16-BIT analog/digital converter.

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Digital signal adapter to relay output

Detection and monitoring of supply voltage failure of up to 21 signals.

Solid state relay (AC) 32A with radiator rail

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

RS232 Communication Extender-Amplifier-Isolator (Pair)

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Multiplexer of 8 digital signals to RS485

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Variable generator with 8 independent 0-4/20mA channels

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

RS232 to TTL/CMOS Bi-directional Converter (5V)

2-intensity deviation current relay at the input

8-channel opto-isolated digital adapter

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

Variable power supply for laboratory tabletop 0/30V (5A)

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Voltage output converter with amplified current

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Encoder rotation direction discriminator, with a - b channels

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Universal PTC trip temperature protection relay

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

Converter - isolator for analog signals. RS485 output

Multiplexer that statically switches 16 channels 0-4/20mA

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

AC/DC Single Phase Power Analyzer (TRMS)

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

GSM (4G) Wireless Iiot Gateway Mobile App

2 channels of Logic Function (+) OR of 2 signals

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

4-20 mA SIGNAL READER.

Logical function (X,+) AND, OR of 4 signals

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

AC current relay. Overload/underload.

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

AC/DC current relay (16A). Overload and underload., 2 relays

USB to RS232/485 Bi-Directional Isolator Converter

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Pulse number multiplier

Generator - simulator of PROCESS electrical signals.

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Multiplexer that statically switches 8 channels 0-4/20mA

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Divisor - pulse counter by an integer (1.. 999).

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Wirelessly configurable RTD to 0/10V converter in chip format

Multifunction timer relay

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Voltage/current/potentiometer to frequency converter, or PWM

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts