RESIS-42R

Adapts digital signals from one type and/or level to another.

AC/DC Single Phase Power Analyzer (TRMS)

Variable power supply for laboratory tabletop 0/30V (5A)

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

AC/DC Power Supply - DC/DC Converter 20W

USB to RS232 Bi-Directional Converter

Converter for averaging 4 RTD signals

Logical function (X,+) AND, OR of 4 signals

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

8-channel opto-isolated digital adapter

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Pulse absence detector relay (rotation, jams, ..)

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

Process relay v/i. Digital setpoint numerical preselectors

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Pt100 temperature sensor converter Output: 0/10V.

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Multiplexer that statically switches 8 channels 0-4/20mA

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Converter for averaging 4 RTD signals to 4/20mA

Pulse Width Amplitude Shaper (T.on)

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Detection and monitoring of supply voltage failure of up to 21 signals.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Wirelessly configurable RTD to 0/10V converter in chip format

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

4 Pt100 sensor controller with 2 relay alarms

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Isolated pulse frequency converter (0.01 to 100 KHz.)

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Multifunction timer relay

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Solid state relay (AC) 32A with radiator rail

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Voltage output converter with amplified current

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Multiplexer of 8 digital signals to RS485

Adapts and DUPLICATEs digital signals from one type and/or level to another

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

RS232 to TTL/CMOS Bi-directional Converter (5V)

4/20mA RTD Duplicator-Isolator (Active/Passive)

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Isolated multiplexer of 8 thermocouples to one thermocouple output

GSM (4G) Wireless Iiot Gateway Mobile App

Safety relay to protect power systems. 230VAC for 400VAC errors

RS232 - RS485 - RS232 isolator-repeater converter

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Digital signal adapter to relay output

Amplifier for proportional solenoid valves, voltage regulation (speed)

12-bit - 16-BIT analog/digital converter.

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Universal 3-way galvanic isolator output V (Ballasts)

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

2-intensity deviation current relay at the input