RAL 965460W F3

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Solid state relay (AC) 32A with radiator rail

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Safety relay to protect power systems. 230VAC for 400VAC errors

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Variable power supply for laboratory tabletop 0/30V (5A)

7 channel digital signal adapter to relay output

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Pulse Width Amplitude Shaper (T.on)

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

4/20mA RTD Duplicator-Isolator (Active/Passive)

RS232 - RS485 - RS232 isolator-repeater converter

Voltage/current/potentiometer to frequency converter, or PWM

Wall temperature sensors

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Adapts and DUPLICATEs digital signals from one type and/or level to another

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Pulse absence detector relay (rotation, jams, ..)

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

AC/DC current relay (16A). Overload and underload., 2 relays

Converter with input: 4/20mA (active/passive), output: Ethernet (TCPServer, UDP, MQTT..)

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Variable generator with 8 independent 0-4/20mA channels

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Encoder rotation direction discriminator, with a - b channels

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Universal PTC trip temperature protection relay

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

12-bit digital/analog converter.

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Multiplexer of 8 digital signals to RS485

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

GSM (4G) Wireless Iiot Gateway Mobile App

Multifunction timer relay

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

AC/DC Power Supply - DC/DC Converter 20W

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

8-channel opto-isolated digital adapter

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

USB to RS232/485 Bi-Directional Isolator Converter

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Multiplexer that statically switches 8 channels 0-4/20mA

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Converter for averaging 4 RTD signals

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Pulse number multiplier

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Logical function (X,+) AND, OR of 4 signals

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Generator - simulator of PROCESS electrical signals.

2-intensity deviation current relay at the input

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)