ADAPT OCTO

Detection and monitoring of supply voltage failure of up to 21 signals.

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Universal PTC trip temperature protection relay

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Isolated multiplexer of 8 thermocouples to one thermocouple output

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Arithmetic converter adder or subtractor

True RMS AC/DC universal voltage and current isolator

Converter for averaging 4 RTD signals to 4/20mA

AC/DC current relay (16A). Overload and underload., 2 relays

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Multiplexer that statically switches 8 channels 0-4/20mA

RS232 to TTL/CMOS Bi-directional Converter (5V)

Pt100 temperature sensor converter Output: 0/10V.

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Voltage output converter with amplified current

Wall temperature sensors

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

7 channel digital signal adapter to relay output

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

USB to RS232 Bi-Directional Converter

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Pulse number multiplier

Converter - isolator for analog signals. RS485 output

Amplifier for proportional solenoid valves, voltage regulation (speed)

12-bit - 16-BIT analog/digital converter.

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

Digital signal adapter to relay output

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Variable power supply for laboratory tabletop 0/30V (5A)

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

AC/DC Power Supply - DC/DC Converter 20W

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Process relay v/i. Digital setpoint numerical preselectors

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Isolated pulse frequency converter (0.01 to 100 KHz.)

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Multiplexer of 8 digital signals to RS485

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Safety relay to protect power systems. 230VAC for 400VAC errors

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

GSM (4G) Wireless Iiot Gateway Mobile App

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Adapts and DUPLICATEs digital signals from one type and/or level to another

Converter for averaging 4 RTD signals

Multiplexer that statically switches 16 channels 0-4/20mA

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Pulse Width Amplitude Shaper (T.on)

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Pulse absence detector relay (rotation, jams, ..)

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Voltage/current/potentiometer to frequency converter, or PWM

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

Adapts digital signals from one type and/or level to another.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Converter with input: 4/20mA (active/passive), output: Ethernet (TCPServer, UDP, MQTT..)

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Universal 3-way galvanic isolator output V (Ballasts)