POSI Plus

AC/DC Single Phase Power Analyzer (TRMS)

Pulse absence detector relay (rotation, jams, ..)

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Converter with input: 4/20mA (active/passive), output: Ethernet (TCPServer, UDP, MQTT..)

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

USB to RS232/485 Bi-Directional Isolator Converter

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Detection and monitoring of supply voltage failure of up to 21 signals.

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Isolated multiplexer of 8 thermocouples to one thermocouple output

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Digital signal adapter to relay output

Multiplexer that statically switches 8 channels 0-4/20mA

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

2 channels of Logic Function (+) OR of 2 signals

Regulator for electromagnetic vibrators 2, 3, 10 Amp

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

USB to RS232 Bi-Directional Converter

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Logical function (X,+) AND, OR of 4 signals

Variable generator with 8 independent 0-4/20mA channels

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

12-bit digital/analog converter.

7 channel digital signal adapter to relay output

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Multiplexer that statically switches 16 0/10V channels

4/20mA RTD Duplicator-Isolator (Active/Passive)

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

RS232 - RS485 - RS232 isolator-repeater converter

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Pulse number multiplier

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

16-channel 0-4/20mA multiplexer, to RS485 Modbus

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Converter for averaging 4 RTD signals

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Encoder rotation direction discriminator, with a - b channels

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

8-channel opto-isolated digital adapter

Variable power supply for laboratory tabletop 0/30V (5A)

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Multiplexer that statically switches 16 channels 0-4/20mA

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Wall temperature sensors

Adapts and DUPLICATEs digital signals from one type and/or level to another

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Process relay v/i. Digital setpoint numerical preselectors

Universal PTC trip temperature protection relay

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Divisor - pulse counter by an integer (1.. 999).

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Multiplexer of 8 digital signals to RS485

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Multifunction timer relay

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Voltage/current/potentiometer to frequency converter, or PWM

True RMS AC/DC universal voltage and current isolator

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

AC/DC current relay (16A). Overload and underload., 2 relays

Generator - simulator of PROCESS electrical signals.

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

RS232 to TTL/CMOS Bi-directional Converter (5V)

Universal 3-way galvanic isolator output V (Ballasts)

AC/DC Power Supply - DC/DC Converter 20W

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Adapts digital signals from one type and/or level to another.

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Amplifier for proportional solenoid valves - regulation by intensity (Torque)