ISO-DUO-10/42

Converter for averaging 4 RTD signals

Adapts digital signals from one type and/or level to another.

Isolated multiplexer of 8 thermocouples to one thermocouple output

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Converter for averaging 4 RTD signals to 4/20mA

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Logical function (X,+) AND, OR of 4 signals

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Voltage/current/potentiometer to frequency converter, or PWM

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

12-bit digital/analog converter.

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Divisor - pulse counter by an integer (1.. 999).

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

4 Pt100 sensor controller with 2 relay alarms

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Generator - simulator of PROCESS electrical signals.

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Process relay v/i. Digital setpoint numerical preselectors

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

USB to RS232 Bi-Directional Converter

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

2-intensity deviation current relay at the input

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

4/20mA RTD Duplicator-Isolator (Active/Passive)

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

AC/DC Power Supply - DC/DC Converter 20W

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Wirelessly configurable RTD to 0/10V converter in chip format

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

AC/DC current relay (16A). Overload and underload., 2 relays

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

8-channel opto-isolated digital adapter

Solid state relay (AC) 32A with radiator rail

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

RS232 to TTL/CMOS Bi-directional Converter (5V)

GSM (4G) Wireless Iiot Gateway Mobile App

12-bit - 16-BIT analog/digital converter.

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

Pulse number multiplier

Multiplexer that statically switches 16 channels 0-4/20mA

Encoder rotation direction discriminator, with a - b channels

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Universal 3-way galvanic isolator output V (Ballasts)

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Variable generator with 8 independent 0-4/20mA channels

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Power supply-DC/DC converter.

Converter - isolator for analog signals. RS485 output

Multifunction timer relay

Multiplexer that statically switches 16 0/10V channels

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Wall temperature sensors

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Amplifier for proportional solenoid valves, voltage regulation (speed)

RS232 Communication Extender-Amplifier-Isolator (Pair)

Multiplexer of 8 digital signals to RS485