MULTICAL

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Power supply-DC/DC converter.

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Universal PTC trip temperature protection relay

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

AC current relay. Overload/underload.

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Divisor - pulse counter by an integer (1.. 999).

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

RS232 to TTL/CMOS Bi-directional Converter (5V)

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolated multiplexer of 8 thermocouples to one thermocouple output

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

2-intensity deviation current relay at the input

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Detection and monitoring of supply voltage failure of up to 21 signals.

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Generator - simulator of PROCESS electrical signals.

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

8-channel opto-isolated digital adapter

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Adapts and DUPLICATEs digital signals from one type and/or level to another

Adapts digital signals from one type and/or level to another.

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Pt100 temperature sensor converter Output: 0/10V.

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Converter - isolator for analog signals. RS485 output

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

USB to RS232/485 Bi-Directional Isolator Converter

Pulse Width Amplitude Shaper (T.on)

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Multiplexer that statically switches 16 channels 0-4/20mA

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Solid state relay (AC) 32A with radiator rail

Voltage/current/potentiometer to frequency converter, or PWM

Converter for averaging 4 RTD signals to 4/20mA

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Voltage output converter with amplified current

Digital signal adapter to relay output

Wirelessly configurable RTD to 0/10V converter in chip format

4 Pt100 sensor controller with 2 relay alarms

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Variable power supply for laboratory tabletop 0/30V (5A)

USB to RS232 Bi-Directional Converter

12-bit digital/analog converter.

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Multifunction timer relay

True RMS AC/DC universal voltage and current isolator

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

Universal 3-way galvanic isolator output V (Ballasts)

12-bit - 16-BIT analog/digital converter.

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

AC/DC current relay (16A). Overload and underload., 2 relays

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Amplifier for proportional solenoid valves, voltage regulation (speed)

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

GSM (4G) Wireless Iiot Gateway Mobile App

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated