ISO2-mV/42R

Adapts digital signals from one type and/or level to another.

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

4 Pt100 sensor controller with 2 relay alarms

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Universal 3-way galvanic isolator output V (Ballasts)

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

12-bit digital/analog converter.

RS232 Communication Extender-Amplifier-Isolator (Pair)

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Multiplexer that statically switches 16 channels 0-4/20mA

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Safety relay to protect power systems. 230VAC for 400VAC errors

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

12-bit - 16-BIT analog/digital converter.

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Encoder rotation direction discriminator, with a - b channels

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Variable power supply for laboratory tabletop 0/30V (5A)

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Converter - isolator for analog signals. RS485 output

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Multiplexer that statically switches 8 channels 0-4/20mA

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Amplifier for proportional solenoid valves, voltage regulation (speed)

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Wirelessly configurable RTD to 0/10V converter in chip format

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Detection and monitoring of supply voltage failure of up to 21 signals.

RS232 to TTL/CMOS Bi-directional Converter (5V)

Pulse number multiplier

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

4/20mA RTD Duplicator-Isolator (Active/Passive)

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Multifunction timer relay

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

USB to RS232 Bi-Directional Converter

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

AC/DC Power Supply - DC/DC Converter 20W

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Arithmetic converter adder or subtractor

Voltage/current/potentiometer to frequency converter, or PWM

True RMS AC/DC universal voltage and current isolator

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Divisor - pulse counter by an integer (1.. 999).

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Digital signal adapter to relay output

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Voltage output converter with amplified current

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Isolated multiplexer of 8 thermocouples to one thermocouple output

AC/DC current relay (16A). Overload and underload., 2 relays

AC/DC Single Phase Power Analyzer (TRMS)

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

2 channels of Logic Function (+) OR of 2 signals

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Multiplexer that statically switches 16 0/10V channels

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module