ISO-DUO-42/10

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

12-bit digital/analog converter.

Divisor - pulse counter by an integer (1.. 999).

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Adapts digital signals from one type and/or level to another.

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Pulse Width Amplitude Shaper (T.on)

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Multiplexer that statically switches 8 channels 0-4/20mA

Isolated pulse frequency converter (0.01 to 100 KHz.)

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Process relay v/i. Digital setpoint numerical preselectors

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

8-channel opto-isolated digital adapter

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Variable power supply for laboratory tabletop 0/30V (5A)

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

USB to RS232 Bi-Directional Converter

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

4/20mA RTD Duplicator-Isolator (Active/Passive)

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Solid state relay (AC) 32A with radiator rail

Detection and monitoring of supply voltage failure of up to 21 signals.

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Safety relay to protect power systems. 230VAC for 400VAC errors

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Variable generator with 8 independent 0-4/20mA channels

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Power supply-DC/DC converter.

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

RS232 Communication Extender-Amplifier-Isolator (Pair)

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

2 channels of Logic Function (+) OR of 2 signals

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Adapts and DUPLICATEs digital signals from one type and/or level to another

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

RS232 to TTL/CMOS Bi-directional Converter (5V)

Universal PTC trip temperature protection relay

Voltage output converter with amplified current

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Generator - simulator of PROCESS electrical signals.

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

True RMS AC/DC universal voltage and current isolator

Converter for averaging 4 RTD signals

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

12-bit - 16-BIT analog/digital converter.

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Digital signal adapter to relay output

AC/DC Power Supply - DC/DC Converter 20W

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

AC/DC current relay (16A). Overload and underload., 2 relays

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Pt100 temperature sensor converter Output: 0/10V.

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Universal 3-way galvanic isolator output V (Ballasts)

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.