PROCESS Relay

RS232 to TTL/CMOS Bi-directional Converter (5V)

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Pulse number multiplier

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Voltage output converter with amplified current

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Pt100 temperature sensor converter Output: 0/10V.

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Converter for averaging 4 RTD signals to 4/20mA

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Logical function (X,+) AND, OR of 4 signals

Converter - isolator for analog signals. RS485 output

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

AC/DC current relay (16A). Overload and underload., 2 relays

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

USB to RS232 Bi-Directional Converter

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Isolated pulse frequency converter (0.01 to 100 KHz.)

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Adapts digital signals from one type and/or level to another.

Wall temperature sensors

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

Variable power supply for laboratory tabletop 0/30V (5A)

Variable generator with 8 independent 0-4/20mA channels

Adapts and DUPLICATEs digital signals from one type and/or level to another

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

7 channel digital signal adapter to relay output

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Voltage/current/potentiometer to frequency converter, or PWM

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Converter with input: 4/20mA (active/passive), output: Ethernet (TCPServer, UDP, MQTT..)

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Divisor - pulse counter by an integer (1.. 999).

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated