POWER 6

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Multiplexer of 8 digital signals to RS485

AC/DC Power Supply - DC/DC Converter 20W

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

4 Pt100 sensor controller with 2 relay alarms

Universal PTC trip temperature protection relay

GSM (4G) Wireless Iiot Gateway Mobile App

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Pt100 temperature sensor converter Output: 0/10V.

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Arithmetic converter adder or subtractor

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

USB to RS232/485 Bi-Directional Isolator Converter

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Power supply-DC/DC converter.

Detection and monitoring of supply voltage failure of up to 21 signals.

Solid state relay (AC) 32A with radiator rail

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

RS232 - RS485 - RS232 isolator-repeater converter

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

8-channel opto-isolated digital adapter

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Isolated multiplexer of 8 thermocouples to one thermocouple output

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Isolated pulse frequency converter (0.01 to 100 KHz.)

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

AC current relay. Overload/underload.

RS232 Communication Extender-Amplifier-Isolator (Pair)

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Pulse absence detector relay (rotation, jams, ..)

Multiplexer that statically switches 8 channels 0-4/20mA

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

4-20 mA SIGNAL READER.

USB to RS232 Bi-Directional Converter

Variable generator with 8 independent 0-4/20mA channels

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Converter - isolator for analog signals. RS485 output

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

AC/DC Single Phase Power Analyzer (TRMS)

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Logical function (X,+) AND, OR of 4 signals

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Adapts and DUPLICATEs digital signals from one type and/or level to another

Variable power supply for laboratory tabletop 0/30V (5A)

Pulse number multiplier

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Converter for averaging 4 RTD signals to 4/20mA

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

7 channel digital signal adapter to relay output

Pulse Width Amplitude Shaper (T.on)

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

True RMS AC/DC universal voltage and current isolator

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

4/20mA RTD Duplicator-Isolator (Active/Passive)

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16