DIGIMUX8.RS4

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Universal 3-way galvanic isolator output V (Ballasts)

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

2 channels of Logic Function (+) OR of 2 signals

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Wall temperature sensors

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Multifunction timer relay

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Multiplexer that statically switches 16 channels 0-4/20mA

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

4-20 mA SIGNAL READER.

12-bit - 16-BIT analog/digital converter.

2-intensity deviation current relay at the input

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

Voltage output converter with amplified current

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Pt100 temperature sensor converter Output: 0/10V.

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

Divisor - pulse counter by an integer (1.. 999).

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Converter - isolator for analog signals. RS485 output

Amplifier for proportional solenoid valves, voltage regulation (speed)

Solid state relay (AC) 32A with radiator rail

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

8-channel opto-isolated digital adapter

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO

Wirelessly configurable RTD to 0/10V converter in chip format

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Detection and monitoring of supply voltage failure of up to 21 signals.

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Process relay v/i. Digital setpoint numerical preselectors

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Converter for averaging 4 RTD signals to 4/20mA

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Power supply-DC/DC converter.

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Generator - simulator of PROCESS electrical signals.

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Variable power supply for laboratory tabletop 0/30V (5A)

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Pulse number multiplier

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Converter for averaging 4 RTD signals

Voltage/current/potentiometer to frequency converter, or PWM

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Isolated multiplexer of 8 thermocouples to one thermocouple output

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

7 channel digital signal adapter to relay output

Logical function (X,+) AND, OR of 4 signals