Signal converters, encoder, Digital Signal and Encoders

MUX2 ENCODER (3)S

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Description

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control
input: 2 encoder / 3 x TTL or PNP or NPN or HTL / DIFER. or 0V/5/24V
Isolated output: 1 encoder / 1 x TTL or PNP or NPN or HTL / DIFER. or 0V/5/24V
Power supply: 24VDC (9.. 26V)

Data sheet

Request a quote, a technical consultation or product information

Other sensors

AMPERCAL

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

ISO2 (PWM) Plus

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

LIMIT-V Plus

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

AMPER-O

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

ISO2-QUATTRO-420

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

LOGIC21x1

Detection and monitoring of supply voltage failure of up to 21 signals.

ISO-QUATTRO-10

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

DUPLO 20-IN

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

TACOCAL

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

MUX8Tc-42R

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

EXPANDI16

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

QUADRUPLE-10

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

ENERGY.3-O-DIS-RS

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

ISO-20EN

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

AQUA-RTD-IN-minidis

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

ISO-DUO-42/10

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

AMPER-O-RS

AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, isolated, high precision. 0...25...50 A

ISO-QUATTRO-10/42

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

ECO-TTL

RS232 to TTL/CMOS Bi-directional Converter (5V)

FORCE ISO Flex

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

MUX8RTD-ISO-42R

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

ISO3-Pt-mini

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

AMPER-BI-Relay-5S/15S

2-intensity deviation current relay at the input

POWER mini 24 / 15 / 12

Power supply-DC/DC converter.

POWER mini Relay2

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

INTEGRATOR PLUS

Voltage/current/potentiometer to frequency converter, or PWM

ADAPTA ENCODER 3

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

OFI-RTD-IN

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

QUADRUPLUS-pot-Plus

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

AMPER-O-RS-300

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

OFI-RTD-IN-minidis

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

ADAPT OCTO

8-channel opto-isolated digital adapter

THERMO-PT-V

Pt100 temperature sensor converter Output: 0/10V.

ADAPTA ENCODER 2

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

RTD-DUPLO-PLUS

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

ISO2 Plus

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

REM 450

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

ISO Flex HEAD

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

WIDTH-INCH

Pulse Width Amplitude Shaper (T.on)

ENERGY.3-DIS-RS

Three-phase power analyzer with indication, RS485, Input 3 x /5A - 3 x 550VAC

SUMA-SP

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

MUXi8

Multiplexer that statically switches 8 channels 0-4/20mA

FORCE.RS4

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

ISO2-70mV/42R

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

DUPLO Pair and DUPLO Pair DUO

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

POSI Plus

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

AMPER Relay .5 / .16

AC current relay. Overload/underload.

ISO2-DUO-420

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

THERMO-RTD-in

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

MEDIA-4xRTD/42R

Converter for averaging 4 RTD signals to 4/20mA

ISO2-420

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

ISO-20

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

ADAPTA Namur – ADAPTA Duo Namur

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

TERMOCAL (family)

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

TERMO-FLEX-Vi

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

AMPLI-V150

Voltage output converter with amplified current

GEN8x020

Variable generator with 8 independent 0-4/20mA channels

MUX4RTD-2

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

TEST-look-mA

4-20 mA SIGNAL READER.

ENERGY-PLUS

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

ISO-M10

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

POWER 6

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

ISO2-V/42R

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

ISO-10/42

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

AQUA-RTD

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

XPUL

Pulse number multiplier

ISO-DUO-M10

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

RX-3005DS

Variable power supply for laboratory tabletop 0/30V (5A)

MULTICAL

Generator - simulator of PROCESS electrical signals.

DIGIMUX16

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

ISO3-PAR-mini

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

ISO-DUO-20EN

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

MUX2 ENCODER (3)S

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

ISO-BALLAST Plus

Universal 3-way galvanic isolator output V (Ballasts)

ECO-USB-RS

USB to RS232/485 Bi-Directional Isolator Converter

ISO-QUATTRO-42/10

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

POSI CAL

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

RESIS/vi

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

ISO-10

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

DIGIMUX8.RS4

Multiplexer of 8 digital signals to RS485

AMPER 2 Relay

AC/DC current relay (16A). Overload and underload., 2 relays

EXTEND-232

RS232 Communication Extender-Amplifier-Isolator (Pair)

ENERGY.3 Plus-RS4-A

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Power-20W-xxVcc

AC/DC Power Supply - DC/DC Converter 20W

POSI2 CAL

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

ISO-DUO-20

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

DUPLO Plus

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

ISO-viR-L42R

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

ADAPTA ENCODER 2-E

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

AQUA-RTD-IN

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

DUPLO-M10

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

GUARDIAN CNV580-LTE-2

GSM (4G) Wireless Iiot Gateway Mobile App

ECO-RS232-wi / ECO-USB-wi

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

HEAD-RTD-V

Wirelessly configurable RTD to 0/10V converter in chip format

ISO-QUATTRO-20

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

LIMIT-V (Pot) Plus

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

MUX4Pt-ISO

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

AMPER-O-300

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

ISO 42R THERMOS

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

ENERGY-O-RS

AC/DC Single Phase Power Analyzer (TRMS)

We are sure that we can help you

Request a quote without obligation, do the necessary technical consultations or request information about our products.