Power-xxW

Pt100 temperature sensor converter Output: 0/10V.

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Voltage output converter with amplified current

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Voltage/current/potentiometer to frequency converter, or PWM

AC/DC current relay (16A). Overload and underload., 2 relays

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Universal 3-way galvanic isolator output V (Ballasts)

Generator - simulator of PROCESS electrical signals.

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Variable generator with 8 independent 0-4/20mA channels

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Power supply-DC/DC converter.

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

12-bit digital/analog converter.

Detection and monitoring of supply voltage failure of up to 21 signals.

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

AC current relay. Overload/underload.

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Wall temperature sensors

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Process relay v/i. Digital setpoint numerical preselectors

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

12-bit - 16-BIT analog/digital converter.

4/20mA RTD Duplicator-Isolator (Active/Passive)

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Adapts digital signals from one type and/or level to another.

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power 24VDC (20..30V) isolated * 2 channels *

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Pulse absence detector relay (rotation, jams, ..)

7 channel digital signal adapter to relay output

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Universal PTC trip temperature protection relay

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Universal variable resistance converter (2 poles) Input: Variable resistance (2 poles) (0.2K.. 10M) LDR´s, PTC, NTC, .. Multiple output: 0-4/20mA and 0/10V. Power supply: 24VDC

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Converter for averaging 4 RTD signals

USB to RS232/485 Bi-Directional Isolator Converter

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Encoder rotation direction discriminator, with a - b channels

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Signal duplicator - isolator 4/20mA (with excitation) and 0/10V (selectable). Potentiometer 2 outputs 0/10V or 4/20mA (active/passive). Power supply: 24VDC to 230VAC

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Amplifier for proportional solenoid valves, voltage regulation (speed)

Digital signal adapter to relay output

Pulse Width Amplitude Shaper (T.on)

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

4 Pt100 sensor controller with 2 relay alarms

Safety relay to protect power systems. 230VAC for 400VAC errors

Multiplexer that statically switches 16 channels 0-4/20mA

4-20 mA SIGNAL READER.

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Isolated multiplexer of 8 thermocouples to one thermocouple output

Multiplexer that statically switches 16 0/10V channels

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Alternating current isolator 1, 5 or 10 Amp. to 4...20 mA loop. Automatic active/passive output

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Converter - isolator for analog signals. RS485 output

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Adapts and DUPLICATEs digital signals from one type and/or level to another

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Multiplexer that statically switches 8 channels 0-4/20mA

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*