MULTI Test

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0/150A - 0/300A - -150/+150A - -300/+300A

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

2-intensity deviation current relay at the input

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Arithmetic converter adder or subtractor

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Radar level sensor, range up to 10 meters.

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

12-bit - 16-BIT analog/digital converter.

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

CHRONOMETER indicator, 32 x 74 format. Simple or cyclic timer. Precision timer

Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Indoor or outdoor wall-mounted temperature sensors, with Pt100 signal, 4-20 mA, 0-10 Vdc, with or without display

TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

Universal programmable tachometer - frequency meter with dual indication.

Indoor CO2 sensor, range up to 4000 ppm, analog output and digital alarm

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Analogue-digital humidity and temperature controller sensor with LED signalling, relay alarm, for indoor use.

Wire displacement sensor, miniature size, ranges from 100 to 350 mm

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Temperature and humidity sensor + Relative Humidity Controller (220Vac)

Safety relay to protect power systems. 230VAC for 400VAC errors

Optical rain sensor

Generator - simulator of PROCESS electrical signals.

Differential pressure transmitter. Measuring range up to 3MPa (30 Bar)

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Static torque sensor, ranges up to 10000 Nm, with 2mv/v output signal

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

7 channel digital signal adapter to relay output

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Multiplexer of 8 digital signals to RS485

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Regulator for electromagnetic vibrators 2, 3, 10 Amp

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Illuminance sensor, luxmeter, measuring range: 0-2000lux / 0-20klux / 0-200klux

Wind speed sensor, industrial anemometer made of metal or carbon fiber, with different types of output signals

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

Rain and/or snow detector

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

4 Pt100 sensor controller with 2 relay alarms

General purpose displacement sensor, spring loaded probe, ranges up to 200 mm, resistance up to 5 Kohm

Vortex flowmeter with temperature and pressure compensation

INCLINOMETER RANGE (±) 10°/30°/60° /90°/ To be specified, 1 or 2 axes, ACCURACY: ±0.02º, RESOLUTION:0.05º

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Insulated thermocouple duplicator J, K, T, E, N, R, S, B - To be able to connect 2 systems to a single thermocouple

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Anti-solar radiation protector

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

Angular displacement sensors, resistive

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

Temperature and humidity transmitter. For ambient and duct. Output signal 4-20 mA, 0-10 vdc and RS485

Combined humidity and temperature sensor, high quality sensor, duct and outdoor.

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Luminosity sensors (luxometers) for industrial and home automation use

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Solid state relay (AC) 32A with radiator rail

Voltage supervisory relay (VDC). Overvoltage and undervoltage

Solar radiation sensor, pyranometer

Indoor CO2, humidity and temperature sensor with RS485 ModBus communication

Displacement sensor range from 10 to 100 mm, with and without spring probe, IP67

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

GSM (4G) Wireless Iiot Gateway Mobile App

USB to RS232/485 Bi-Directional Isolator Converter

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Converter - isolator for analog signals. RS485 output

Portable digital multimeter. MEASURES mA, mV, V, A, Hz, Ohm, uF, ºC (AC/DC).

4/20mA RTD Duplicator-Isolator (Active/Passive)

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output