AMPERCAL

AC/DC (TRMS) current transformer to 4/20mA current loop, with isolation, high precision. 0...25 ...50 A

Galvanic isolator / universal 2-way CONTINUOUS CURRENT converter, DIRECTLY INTENSITY INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, ... optionally 0/15.. 20V, 24Vdc supply

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

7 channel digital signal adapter to relay output

AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision. Range up to 300 amp.

GSM (4G) Wireless Iiot Gateway Mobile App

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

4-20 mA SIGNAL READER.

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Logical function (X,+) AND, OR of 4 signals

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Detection and monitoring of supply voltage failure of up to 21 signals.

Pulse number multiplier

Isolated pulse frequency converter (0.01 to 100 KHz.)

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Junction box for 4 load cells. IP67 field box. For cells with the same impedance, without individual adjustment.

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

True RMS AC/DC universal voltage and current isolator

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Converter - isolator for analog signals. RS485 output

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

6 potentiometer SETPOINTS (precision adjustable), externally selectable by contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential free) without power supply

4/20mA RTD Duplicator-Isolator (Active/Passive)

Voltage output converter with amplified current

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

USB to RS232/485 Bi-Directional Isolator Converter

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Multiplexer of 8 digital signals to RS485

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

Variable power supply for laboratory tabletop 0/30V (5A)

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Universal 2-way galvanic isolator/converter. 2 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

Multiplexer that statically switches 16 channels 0-4/20mA

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

4 channels of 3-way 0/10V isolator (with excitation), 24VDC supply (20.. 30V) isolated

Amplifier for proportional solenoid valves, voltage regulation (speed)

Pulse absence detector relay (rotation, jams, ..)

Voltage/current/potentiometer to frequency converter, or PWM

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

Isolated multiplexer of 8 thermocouples to one thermocouple output

Isolated multiplexer with 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

12-bit - 16-BIT analog/digital converter.

Universal Pt100 3-way galvanic isolator. Input: Pt100 2-3-4 wires.

Digital signal adapter to relay output

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

RS232 - RS485 - RS232 isolator-repeater converter

RS232 to TTL/CMOS Bi-directional Converter (5V)

Pt100 temperature sensor converter Output: 0/10V.

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 4 channels*

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

Solid state relay (AC) 32A with radiator rail

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

8-channel opto-isolated digital adapter

Converter for averaging 4 RTD signals to 4/20mA

Universal multiplexer with 4 x 2-wire RTD (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

Converter for averaging 4 RTD signals

Generator - simulator of PROCESS electrical signals.

Universal PTC trip temperature protection relay

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

RS232 Communication Extender-Amplifier-Isolator (Pair)

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Variable generator with 8 independent 0-4/20mA channels

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

2-position meter for potentiometer (displacement unit to be specified) Valid for any potentiometer value 2 selectable scales (factory) Powered by batteries and charger, LCD display

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

2-intensity deviation current relay at the input

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Universal 3-way galvanic isolator output V (Ballasts)

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Voltage supervisory relay (VDC). Overvoltage and undervoltage

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Adapts digital signals from one type and/or level to another.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

AC/DC Single Phase Power Analyzer (TRMS)

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Universal converter for potentiometric type position sensors (100 Ohm/500Kohm) Multiple output: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.