DANA12 Flex

Process relay v/i. Digital setpoint numerical preselectors

Variable power supply for laboratory tabletop 0/30V (5A)

Multiplexer that statically switches 8 channels 0-4/20mA

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

12-bit - 16-BIT analog/digital converter.

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Multiplexer of 8 digital signals to RS485

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by external potentiometer power supply 24.. 230VAC-DC (±15%) isolated

Wirelessly configurable 4/20mA RTD and Thermocouple isolator (Passive)

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts simple signals to differential ones).

Summing-compensating box for 4 or 8 load cells, with independent sensitivity compensation adjustment. IP65 waterproof box

AC/DC MONOPHASE NETWORK ANALYZER (TRMS, Measurement of energy, voltage, intensity, power, frequency, ..

Wall temperature sensors

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Adapts digital signals from one type and/or level to another.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

RS232 - RS485 - RS232 isolator-repeater converter

Multiplexer that statically switches 16 channels 0-4/20mA

Multifunction timer relay

Quadrupler - 4/20mA signal isolator (with excitation), 4-way isolation 4 outputs 4/20mA (active). Power: 24VDC (20.. 30V)

4/20mA RTD Duplicator-Isolator (Active/Passive)

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Converter - isolator for analog signals. RS485 output

Comparator of the greater or lesser of 2 - 3 or 4 4/20mA or 0...10 Vdc signals.

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM Multiple output: 0/10V (0/5 Vdc) and 0-4/20mA.

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

True RMS AC/DC universal voltage and current isolator

Solid state relay (AC) 32A with radiator rail

Three-phase voltage supervisory relay. Overvoltage, undervoltage and sequence

RTD duplicator-isolator at 4/20mA (Active/Passive) and 0-10 Vdc

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

3-channel encoder isolator - amplifier - duplicator - adapter. Up to 1MHz. (adapts differential signals to simple signals)

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Isolated multiplexer of 8 thermocouples to one thermocouple output

Pulse number multiplier

Amplifier for proportional solenoid valves, voltage regulation (speed)

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Duplicator - signal isolator 0/10V (with excitation) input: 0/10V excitation (24V/20mA) isolated isolated output 2 x 0/10V supply 24VDC (20.. 30V) isolated

Universal PTC trip temperature protection relay

Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

Wirelessly configurable RTD to 0/10V converter in chip format

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable internal front power supply 24.. 230VAC-DC (±15%) isolated

NPN/PNP sensor power supply to relay, adapter from PNP/NPN to potential-free contact output

Galvanic isolator. Wireless configuration, Input: 0/10V - 0-4/20mA - RESISTANCE 0/4K, 10 linearization sections, Isolated output 4/20mA (Active / Passive) automatic, Power: 24VDC (10.. 30V)

Converter for averaging 4 RTD signals to 4/20mA

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

3-way thermocouple galvanic isolator at 0-4/20mA and 0/10V. In narrow 6.2mm case

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

DC-DC Converter, Regulator ISOLATOR. 12 to 24 Vdc

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

8-channel opto-isolated digital adapter

Digital signal adapter to relay output

Power supply-DC/DC converter.

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Detection and monitoring of supply voltage failure of up to 21 signals.

Universal 2-way galvanic isolator/converter. input: mV (DC), Wirelessly configurable ranges (0/10mV.. 10V), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Isolator - amplifier - duplicator - adapter for 2 encoder channels. Up to 1MHz. (adapts differential signals to simple signals).

Universal 3-way galvanic isolator output V (Ballasts)

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

4-20 mA SIGNAL READER.

2 channels of Logic Function (+) OR of 2 signals

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

Passive 2-way galvanic isolator 4/20mA. 4 channels (ISO2 QUATTRO-420) in the same box., Self-powered 24VDC.

Comparator of the largest of 2 inputs 0-4/20mA, 0/10V, Pot. Relay output

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Passive 4/20mA 2-way galvanic isolator. 2 channels (ISO2 DUO 420) Self-powered 24VDC.

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Encoder rotation direction discriminator, with a - b channels

Isolate 4/20mA or 0/20mA signals, 2 channels, do NOT require auxiliary power supply, they are placed as a simple transformer, double

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Pt100 temperature sensor converter Output: 0/10V.

Universal 2-way galvanic isolator/converter. 4 channels, Input: 4/20mA (Active/Passive), Output 0-10 VDC, Power: 10...30 VDC

Pulse absence detector relay (rotation, jams, ..)

Variable generator with 8 independent 0-4/20mA channels

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

RS232 Communication Extender-Amplifier-Isolator (Pair)

Pt100 generator with digital display Simulates 2 or 3 wire Pt100, range -50.. +400ºC Power supply 24.. 230VAC-DC (±15%) isolated

Multiplexer of 2 encoders of 3 channels to 1 encoder with synchronized control

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

USB to RS232 Bi-Directional Converter