ENERGY.3-O-DIS-RS

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

PID controller (cooling-heating), temperature probe reading, regulation output control, integrated in power SSR module

Generator - simulator of frequency (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC, .. output. Frequency range 0.1Hz to 100 KHz.

8 RTD multiplexer (3H) to 4/20mA output (Active / Passive)

AC/DC current relay (16A). Overload and underload., 2 relays

Universal 3-way galvanic isolator output V (Ballasts)

Divisor - pulse counter by an integer (1.. 999).

DIGITAL ADAPTER Magnetic, adapts the pulse signal of a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, without probe.

Pt100 temperature sensor converter Output: 4/20mA (Active / Passive) - 0/10V and intermediate values. Dual power supply: 24VDC and 230 Vac

Universal 2-way galvanic isolator/converter. Input Programmable ranges (0/10.. 1000V), Output 0-4/20mA (Active / Passive) automatic, Power supply: 10...30 VDC

Converter with Pt100 probe built into terminal to 4/20mA (Passive) in rail box.

THERMOCOUPLE CONVERTER AND Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 WIRES, PROGRAMMABLE VIA PC

Isolate 4/20mA or 0/20mA signals, 8 channels do NOT require auxiliary power * EIGHT CHANNELS IN THE SAME BOX *

USB to RS232 Bi-Directional Converter

Quadrupler - potentiometer signal isolator potentiometer input isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Isolator-converter to active output 4/20mA, Input: 0-10 Vdc, Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Universal 8 x 2-wire RTD multiplexer (NTC 10K, PTC 1K, Pt1000, Pt100, ..) at the output of the same probe

USB to RS232/485 Bi-Directional Isolator Converter

Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power required

Wirelessly configurable 4/20mA thermocouple isolator in IP65 waterproof case

Adapts the pulse signal of a Namur pickup to a PNP/NPN transistor

Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power: 24VDC (20.. 30V) isolated.

General purpose power supply, with 75W / 120W / 240W power, 24 Vdc output

Three-phase network analyzer with indication, RS485 + 4/20mA, Input 3 x /5A - 3 x 550VAC

Universal galvanic PWM isolator at 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22. .30V)

3-way isolator input 0/10V, excitation (24V/20mA) isolated, output isolated 0/10V, Power supply 24VDC (20..30V) isolated

Converter for averaging 4 RTD signals

Digital signal adapter to relay output

RS232 - RS485 - RS232 isolator-repeater converter

Solid state relay (AC) 32A with radiator rail

Expander from 1 digital signal to 16 digital outputs. Expandable to 32, 48, 64, .. for DIGIMUX16

Adapts and DUPLICATEs digital signals from one type and/or level to another

Multiplexer of 8 digital signals to RS485

2 channels of Logic Function (+) OR of 2 signals

Multiplexer with 4 or 8 3-wire Pt100, Pt1000 probes at the output of the same probe

AC/DC Power Supply - DC/DC Converter with Symmetrical Output ±

Ethernet to RS485 Modbus RTU/TCP-IP multi-client isolator converter

Universal 2-way galvanic isolator/converter. 0/70mV (DC), Output 0-4/20mA (Active / Passive) automatic, Power: 10...30 VDC

Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires).. Light and autonomous Digital setpoint by means of preselectors

3-channel av,i potentiometer - joystick (position) converter. 3 pot. inputs >1K5. 3 voltage (0/10V or -5/+5V) or current (4/20mA) outputs. Power supply: 24VDC

4-20 mA SIGNAL READER.

Quadrupler - signal isolator 4/20mA (with excitation) input 4/20mA, excitation (15V/20mA) isolated isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24. .230VAC-DC (±15%) isolated

4/20mA cable converter for 1 load cell, 4/20mA output signal BUILT-IN multiplexed, (allows to control each cell individually)

Duplicator - signal isolator 0/±10V input: 0/±10V (24V/20mA) isolated isolated output 2 x 0/±10V supply 24VDC (20.. 30V) isolated

Isolated pulse frequency converter (0.01 to 100 KHz.)

AC current relay. Overload/underload.

12-bit - 16-BIT analog/digital converter.

Universal converter from 1 to 4 load cells (mV input). Multiple output: 0-4/20mA and ± 0/10V. Power supply: 24VDC. Internally equipped with a standard cell for testing and calibration.

Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)

Isolated Pt100 duplicator (supports pulsed signal) to Pt100 + 4/20mA and 0/10V

Zero-crossing solid state relay specially designed for resistive loads. (AC) 50A/75A with radiator rail, width 22.5mm

Profibus or Profinet gateways to RS485 Modbus and CANopen gateway to Profibus or Profinet

3-way isolator input ± 0/10V, excitation (24V/20mA) isolated, output isolated ± 0/10V, Power supply 24VDC (20.. 30V) isolated * 2 channels *

Wirelessly configurable RTD to 4/20mA converter (Passive) in tablet format

Converter for averaging 4 RTD signals to 4/20mA

Process relay v/i. Digital setpoint numerical preselectors

Pt100 / Pt1000 / NTC / PTC temperature value generator (24 values with maximum error of 0.08%)

Universal PTC trip temperature protection relay

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Multifunction timer relay

Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, drives hydraulic

Isolator-converter Input: 0-10 Vdc to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated

Voltage/current/potentiometer to frequency converter, or PWM

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated * 2 channels*

8-channel opto-isolated digital adapter

GSM (4G) Wireless Iiot Gateway Mobile App

Universal converter for up to 4 load cells, in IP65 watertight box. Isolated inputs, with sensitivity adjustment for each cell. Multiple output: 0-4/20mA and ± 0/10V. Dual power supply: 24VDC and 115/230VAC.

Detection and monitoring of supply voltage failure of up to 21 signals.

Duplicator - 4/20mA signal isolator, *** INPUT: ACTIVE/PASSIVE *** OUTPUTS: 2X 4/20mA active, 24VDC (20.. 30V) isolated

Isolator-converter input: 0/1500VDC to Isolated output 0-4/20mA active, Power: 24VDC (20.. 30V) isolated. Solar panels

HIGH precision power supply for load cells. Output: 10V(4V-10.5V)-125mA.

16-channel 0-4/20mA multiplexer, to RS485 Modbus

Logical function (X,+) AND, OR of 4 signals

Isolator-converter to active output 4/20mA, Input: 4 x 0-10 Vdc, Isolated output 4 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated, 4 channels in the same box.

Pulse number multiplier

Variable alternating current sinusoidal desktop generator. 0/5A(AC) 50Hz

Variable generator with 8 independent 0-4/20mA channels

Converter module 1 load cell input (bridge), allows connecting up to 4 cells to the same input, averages the signal. RS485-modbus output Power supply 19...40 Vdc

Passive 4/20mA 2-way galvanic isolator. 1 channel (ISO2 420) Self-powered 24VDC.

USB or RS232/RS485 bidirectional isolator converter. Wireless transmitter-receiver 100-200mts

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) - 2 channels

Universal isolator of alternating sinusoidal current 0/1A, 0/5A, 0/10A (AC) Multiple output: 0/20mA or 4/20mA (Active / Passive), 0/10V, intermediate and INVERSE values. Dual power supply: 24VDC -115/230VAC.

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup) * 4 channels *

Wirelessly configurable RTD to 4/20mA converter (Active/Passive)

Universal 2-way galvanic converter/isolator. Input: 0... 500 mV, 0... 700 V, (solar space up to 1500 V) / 20 mA, PWM, adjustable output (max. 5mA) 0/24Vdc for control 6/12/18Vdc.. others, 24VDC power supply (20..30V range)

Quadrupler - signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Voltage supervisory relay (VAC). Overvoltage and undervoltage.

Multiplexer of 16 digital signals to a selectable PNP/NPN digital output

12-bit digital/analog converter.

Wirelessly configurable Thermocouple and RTD to 4/20mA Isolator Converter (Active/Passive)

3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with excitation to passive loops), isolated output: 0-4/20mA (Active) Power supply 24VDC (20.. 30V ) isolated

Amplifier for proportional solenoid valves - regulation by intensity (Torque)

2-intensity deviation current relay at the input

Isolator for passive collectors. Passive output 4/20mA, input: 4/20mA (for passive pickup)

Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole - 3 x 550VAC)

Arithmetic converter adder or subtractor

Generator - simulator of PROCESS electrical signals.

Quadrupler - signal isolator 0/10V (with excitation), Isolation 4 ways 4 outputs 0/10V Power: 24VDC (20.. 30V)

Expansion of 4 or 8 Pt100 probes for the MUX8Pt-ISO