Level, Liquids or solids, Sensors

NPR80G-x

Radar level sensor

Description

The NPR80G is a frequency-modulated continuous-wave (FMCW) radar level sensor designed for accurate, non-contact measurements in fuel tanks and other complex industrial environments. It operates at frequencies between 76 and 81 GHz and can measure levels up to 120 meters with an accuracy of up to ±1 mm.
4-20 mA output signal + Hart or RS485

Thanks to its beam angle of only 3° and its ability to work with materials of low dielectric constant (≥2), it is ideal for installations where high precision is required, even in environments with dust, vapors or high temperatures (up to 200 °C).

Data sheet

Request a quote, a technical consultation or product information

Other sensors

Weather vane-420-M12

Wind direction sensor for industrial use, with 4-20 mA output signal

HPS-LX

Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses

TPH SERIES

Industrial pressure sensor, -1.0 /…2.5 /0…6 /0…10 /…16 /0…25 /0…60 /… 100 /…250 /…400 /….600 Bar, 4-20 mA output, via M12 connector, 1/4" thread

OFI-RTD-IN-minidis

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

DPF-CO2-ANCO2L

Indoor CO2 sensor, range up to 4000 ppm, analog output and relay alarm

ECM33-C

SENSORS FOR EDDY CURRENT DISPLACEMENT MEASUREMENT, RANGES 1-2-4-5 mm, output signal 4-20 mA - 0-10 Vdc, RS485

MPT and ITP

Wall temperature sensors

HPS-M

Wire displacement sensor, ranges from 1000 mm to 4000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

xPT-xxx

Indoor or outdoor wall-mounted temperature sensors, with Pt100 signal, 4-20 mA, 0-10 Vdc, with or without display

DP 100.xx

Wind speed sensor, industrial anemometer made of metal or carbon fiber, with different types of output signals

DPK300.x

Dust concentration sensor

DRFI

Radar level measurement for dams and open channels

DL3-XX

Laser displacement measurement sensor, ranges from 0 to 40 meters or 0 to 80 meters, 4-20 mA output signal and communication, 1 mm accuracy.

DNM

Float level sensor, magnetic technology.

DP-095

Anti-solar radiation protector

Temperature sensors with “S” cable

Range of temperature sensors with cable output, Pt100, Pt1000, thermocouples, NTC, PTC.

HUME-Soil-00x

HUME-Soil-0x soil temperature, humidity and conductivity sensor, with 4-20 mA, 0-10 Vcc, RS485 output signal with 2 meters of cable.

DPF-AN2TH

Analogue-digital humidity and temperature controller sensor with LED signalling, relay alarm, for indoor use.

XCA-xx-x

INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.

DPF-MITH

Indoor humidity and temperature sensor with RS485 ModBus communication

DPLVDT-20-xx

LVDT displacement sensor, ranges from 10 to 40 mm, with or without probe, with separate electronics.

TPS30

Submersible pressure level sensor, up to 150 meters of water column

DP 110.xx

Wind direction sensor

HPS-SXXX

Wire displacement sensor, miniature size, ranges from 100 to 350 mm

DPK-401

Optical rain sensor

DFI4x0

Equipment for measuring inclination in 1 or 2 axes, color LCD screen, battery or USB powered, range +-90º, accuracy 0.05%, magnet fixing.

DPK204

Solar radiation sensor, pyranometer

DP 120

Combined wind speed and direction sensor

DPLVDT-08-xx

LVDT displacement sensor, pencil type, 8 mm diameter, repeatability better than 1 micron, ranges 2.5, 5 and 10 mm.

DPF-CO2-SCF

Indoor CO2 sensor, range up to 4000 ppm, analog output and digital alarm

TPD710

Differential pressure transmitter. Measuring range up to 3MPa (30 Bar)

DKF39x

Accelerometer with up to 3 axes, the output signal can be in mA, Vcc and RS485 communication

ANEMO-PUL.M12

Anemometer with pulse output, proportional to wind speed, industrial use

IKPM

Displacement sensor range from 10 to 100 mm, with and without spring probe, IP67

AQUA LUX-xxx family

Luminosity sensors (luxometers) for industrial and home automation use

IKTC

Industrial resistive displacement sensor, range from 50 mm to 1250 mm

DPF-AN2TH

Temperature and humidity sensor + Relative Humidity Controller (220Vac)

TXM-xx

HIGH PRECISION RANGE ±1...90º, 2 axes, output signal 4-20mA / 0-5 Vdc / Rs485 / CanBus, PRECISION: ±0.005º, RESOLUTION: 0.001º

DPF 160

Combined humidity and temperature sensor, high quality sensor, duct and outdoor.

OFI-RTD-IN

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

DPF-MOCO2TH

CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication

BPSE

The BPSE load cell is used to measure compression forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.

ALCC-xx

Tilt sensor for platform control, 1 or 2 axes, programmable alarm range, range +-15º, accuracy 0.1º, 1Amp contact, NC or NA, 24 Vdc power supply, IP67

AQUA-RTD-IN

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

HPS-Sxx

Wire displacement sensor, miniature size, ranges 250, 500, 750, 1000 mm

TPD-33x

Differential pressure transmitter/controller

DFI8x0

High precision tilt measurement equipment on 1 or 2 axes, range +-15º, precision 0.005º, resolution 0.001º

CPx500 Series

Angular displacement sensors, resistive

PE-01

Static torque sensor, ranges up to 10000 Nm, with 2mv/v output signal

HPS-S

Wire displacement sensor, ranges from 100 mm to 1250 mm, with 5 Kohm resistance output signal, 0-5/10 Vdc, 4-20 mA, RS485 or pulse, optionally with IP67 environmental protection. Robust

DPF-AOCO2

Analog-digital CO2 Controller Sensor, with ModBus RS485 communication, for OUTDOORS

DPFS-xxx

Compact ultrasound stations, RS485 ModBus communication

DPFQ500D

Field transmitters for measuring concentration of different types of gases. With alarm, light signal and use in ATEX zones. For INDOOR - OUTDOOR

AQUA-RTD-IN-minidis

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

IPKM-XX

Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.

DRUE

Ultrasonic level sensor, range up to 10 meters, output signal RS485/ 4-20 mA / 0-5 Vdc.

DPF-AN3CO2THL

Analogue-digital CO2, humidity and temperature controller sensor with LED signalling and relay alarm, for indoor use.

DPK210-xxx

Illuminance sensor, luxmeter, measuring range: 0-2000lux / 0-20klux / 0-200klux

TRH022

Temperature and humidity transmitter. For ambient and duct. Output signal 4-20 mA, 0-10 vdc and RS485

NPR80G-x

Radar level sensor

CV-0x Flowmeter

Vortex flowmeter with temperature and pressure compensation

TSC-xx

INCLINOMETER RANGE (±) 10°/30°/60° /90°/ To be specified, 1 or 2 axes, ACCURACY: ±0.02º, RESOLUTION:0.05º

DPK402

Rain and/or snow detector

TRH070

Humidity and temperature sensor, for high temperature, -40...+180ºC

TPM61

Industrial pressure gauge, range up to 600 bar, 4-digit LCD

DPF-MICO2TH32

Indoor CO2, humidity and temperature sensor with RS485 ModBus communication

SDTxx

Range of resistive displacement sensors, with different mounting options, with a range from 10 mm to 200 mm.

DR-2xxx

Radar level sensor, range up to 10 meters.

TCA-xxx

Inclinometer with RS485 output, temperature-compensated, high precision. 1 or 2 axes. Temperature-compensated.

TSM-xx

Precision tilt sensor with ranges from ±1...90º, 2 axes, output signal 4-20mA / 0-5 Vdc / RS485 / CanBus, ACCURACY: ±0.005º, RESOLUTION: 0.001º

TDC-xx-x

TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g

DCLN3E

Load cell for strain measurement on 3 axes, design-based average range, output signal 2 mV/Vx axis

IKTR

General purpose displacement sensor, spring loaded probe, ranges up to 200 mm, resistance up to 5 Kohm

DPK400

Rocker rain gauge

AQUA-RTD-minidis

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

ANEMO-Relay.M12

Anemometer with direct alarm output (adjustable) with relay switching contact. Also available with 4...20 mA output.

TST-xx

Industrial inclinometer. Range 10º to 360º, 1 and 2 axes, Output signal 0.5-4.5 Vdc. / 4...20 mA, CAN / RS485/ TTL / 422, Power supply 9...36 Vdc, IP67, Working temp. -40...+85ºC, accuracy ±0.2º

AB-SUB Flowmeter

Electromagnetic flowmeter, with 4-20 mA and pulse output signal, optional HART or ModBus communication, pipes up to DN1200, clamp or flange mounting.

CTC

Universal traction-compression load cell, from 15 to 5000 kg. 2 mv/v.

BPA

Compression load cell, special spring testing.

HPS-L

Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

HPS-SX

Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

DPF-MIC02

NDIR sensor CO2 controller (4000 ppm) RS485 output with LED signaling

RTP-001

Adjustable industrial thermostat.

DP330.xx

Temperature, humidity and/or atmospheric pressure sensor