Humidity, Civil work, Sensors, Temperature

HUME-Soil-00x

HUME-Soil-0x soil temperature, humidity and conductivity sensor, with 4-20 mA, 0-10 Vcc, RS485 output signal with 2 meters of cable.

Description

HUME-Soil-0x soil temperature, humidity and conductivity sensor, with 4-20 mA, 0-10 Vcc, RS485 output signal with 2 meters of cable.

The soil temperature, humidity and EC sensor is a fundamental tool for observing and studying the presence, evolution, improvement and dynamics of water and salt in saline soils.
This 3-in-1 soil sensor creatively measures salinity, moisture, and temperature simultaneously, greatly simplifying the systematic assessment of soil conditions. By measuring the soil's dielectric constant, it can directly and reliably reflect the actual moisture content of various soils. Currently, our 3-in-1 soil sensor only has RS485 and USB outputs.

Data sheet

Request a quote, a technical consultation or product information

Other sensors

OFI-RTD-IN

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

ANEMO-Relay.M12

Anemometer with direct alarm output (adjustable) with relay switching contact. Also available with 4...20 mA output.

TCA-xxx

Inclinometer with RS485 output, temperature-compensated, high precision. 1 or 2 axes. Temperature-compensated.

DPFQ500D

Field transmitters for measuring concentration of different types of gases. With alarm, light signal and use in ATEX zones. For INDOOR - OUTDOOR

TSM-xx

Precision tilt sensor with ranges from ±1...90º, 2 axes, output signal 4-20mA / 0-5 Vdc / RS485 / CanBus, ACCURACY: ±0.005º, RESOLUTION: 0.001º

BPA

Compression load cell, special spring testing.

DPF-AN2TH

Analogue-digital humidity and temperature controller sensor with LED signalling, relay alarm, for indoor use.

Weather vane-420-M12

Wind direction sensor for industrial use, with 4-20 mA output signal

DPF-AN3CO2THL

Analogue-digital CO2, humidity and temperature controller sensor with LED signalling and relay alarm, for indoor use.

TDC-xx-x

TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g

DPF-AN2TH

Temperature and humidity sensor + Relative Humidity Controller (220Vac)

DPF-CO2-ANCO2L

Indoor CO2 sensor, range up to 4000 ppm, analog output and relay alarm

DPK204

Solar radiation sensor, pyranometer

DPF-CO2-SCF

Indoor CO2 sensor, range up to 4000 ppm, analog output and digital alarm

HPS-SX

Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

DPF 160

Combined humidity and temperature sensor, high quality sensor, duct and outdoor.

Temperature sensors with “S” cable

Range of temperature sensors with cable output, Pt100, Pt1000, thermocouples, NTC, PTC.

DPFS-xxx

Compact ultrasound stations, RS485 ModBus communication

XCA-xx-x

INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.

TPH SERIES

Industrial pressure sensor, -1.0 /…2.5 /0…6 /0…10 /…16 /0…25 /0…60 /… 100 /…250 /…400 /….600 Bar, 4-20 mA output, via M12 connector, 1/4" thread

AQUA-RTD-IN

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

BPSE

The BPSE load cell is used to measure compression forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.

HPS-SXXX

Wire displacement sensor, miniature size, ranges from 100 to 350 mm

DPF-MICO2TH32

Indoor CO2, humidity and temperature sensor with RS485 ModBus communication

DP 100.xx

Wind speed sensor, industrial anemometer made of metal or carbon fiber, with different types of output signals

TPD710

Differential pressure transmitter. Measuring range up to 3MPa (30 Bar)

AQUA-RTD-minidis

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

xPT-xxx

Indoor or outdoor wall-mounted temperature sensors, with Pt100 signal, 4-20 mA, 0-10 Vdc, with or without display

HPS-LX

Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses

DL3-XX

Laser displacement measurement sensor, ranges from 0 to 40 meters or 0 to 80 meters, 4-20 mA output signal and communication, 1 mm accuracy.

DPF-MOCO2TH

CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication

DPK400

Rocker rain gauge

DPF-MITH

Indoor humidity and temperature sensor with RS485 ModBus communication

TXM-xx

HIGH PRECISION RANGE ±1...90º, 2 axes, output signal 4-20mA / 0-5 Vdc / Rs485 / CanBus, PRECISION: ±0.005º, RESOLUTION: 0.001º

DFI8x0

High precision tilt measurement equipment on 1 or 2 axes, range +-15º, precision 0.005º, resolution 0.001º

AQUA LUX-xxx family

Luminosity sensors (luxometers) for industrial and home automation use

PE-01

Static torque sensor, ranges up to 10000 Nm, with 2mv/v output signal

HPS-S

Wire displacement sensor, ranges from 100 mm to 1250 mm, with 5 Kohm resistance output signal, 0-5/10 Vdc, 4-20 mA, RS485 or pulse, optionally with IP67 environmental protection. Robust

TPD-33x

Differential pressure transmitter/controller

DRFI

Radar level measurement for dams and open channels

TST-xx

Industrial inclinometer. Range 10º to 360º, 1 and 2 axes, Output signal 0.5-4.5 Vdc. / 4...20 mA, CAN / RS485/ TTL / 422, Power supply 9...36 Vdc, IP67, Working temp. -40...+85ºC, accuracy ±0.2º

ANEMO-PUL.M12

Anemometer with pulse output, proportional to wind speed, industrial use

DPF-AOCO2

Analog-digital CO2 Controller Sensor, with ModBus RS485 communication, for OUTDOORS

TPM61

Industrial pressure gauge, range up to 600 bar, 4-digit LCD

TPS30

Submersible pressure level sensor, up to 150 meters of water column

HPS-L

Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

TSC-xx

INCLINOMETER RANGE (±) 10°/30°/60° /90°/ To be specified, 1 or 2 axes, ACCURACY: ±0.02º, RESOLUTION:0.05º

DR-2xxx

Radar level sensor, range up to 10 meters.

DPLVDT-20-xx

LVDT displacement sensor, ranges from 10 to 40 mm, with or without probe, with separate electronics.

IKPM

Displacement sensor range from 10 to 100 mm, with and without spring probe, IP67

SDTxx

Range of resistive displacement sensors, with different mounting options, with a range from 10 mm to 200 mm.

DP-095

Anti-solar radiation protector

DPK402

Rain and/or snow detector

AB-SUB Flowmeter

Electromagnetic flowmeter, with 4-20 mA and pulse output signal, optional HART or ModBus communication, pipes up to DN1200, clamp or flange mounting.

DPK-401

Optical rain sensor

DP 120

Combined wind speed and direction sensor

DPLVDT-08-xx

LVDT displacement sensor, pencil type, 8 mm diameter, repeatability better than 1 micron, ranges 2.5, 5 and 10 mm.

IKTC

Industrial resistive displacement sensor, range from 50 mm to 1250 mm

ALCC-xx

Tilt sensor for platform control, 1 or 2 axes, programmable alarm range, range +-15º, accuracy 0.1º, 1Amp contact, NC or NA, 24 Vdc power supply, IP67

HPS-M

Wire displacement sensor, ranges from 1000 mm to 4000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

CPx500 Series

Angular displacement sensors, resistive

HUME-Soil-00x

HUME-Soil-0x soil temperature, humidity and conductivity sensor, with 4-20 mA, 0-10 Vcc, RS485 output signal with 2 meters of cable.

IPKM-XX

Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.

DP330.xx

Temperature, humidity and/or atmospheric pressure sensor

DRUE

Ultrasonic level sensor, range up to 10 meters, output signal RS485/ 4-20 mA / 0-5 Vdc.

DPK210-xxx

Illuminance sensor, luxmeter, measuring range: 0-2000lux / 0-20klux / 0-200klux

CV-0x Flowmeter

Vortex flowmeter with temperature and pressure compensation

OFI-RTD-IN-minidis

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

AQUA-RTD-IN-minidis

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

IKTR

General purpose displacement sensor, spring loaded probe, ranges up to 200 mm, resistance up to 5 Kohm

DFI4x0

Equipment for measuring inclination in 1 or 2 axes, color LCD screen, battery or USB powered, range +-90º, accuracy 0.05%, magnet fixing.

TRH022

Temperature and humidity transmitter. For ambient and duct. Output signal 4-20 mA, 0-10 vdc and RS485

DPK300.x

Dust concentration sensor

HPS-Sxx

Wire displacement sensor, miniature size, ranges 250, 500, 750, 1000 mm

DNM

Float level sensor, magnetic technology.

RTP-001

Adjustable industrial thermostat.

DCLN3E

Load cell for strain measurement on 3 axes, design-based average range, output signal 2 mV/Vx axis

MPT and ITP

Wall temperature sensors

DPF-MIC02

NDIR sensor CO2 controller (4000 ppm) RS485 output with LED signaling

CTC

Universal traction-compression load cell, from 15 to 5000 kg. 2 mv/v.

DKF39x

Accelerometer with up to 3 axes, the output signal can be in mA, Vcc and RS485 communication

ECM33-C

SENSORS FOR EDDY CURRENT DISPLACEMENT MEASUREMENT, RANGES 1-2-4-5 mm, output signal 4-20 mA - 0-10 Vdc, RS485

DP 110.xx

Wind direction sensor