Sensors, Temperature - Humidity, Several

DP-095

Anti-solar radiation protector

Description

Sunshields for humidity and temperature sensors are essential to ensure accurate measurements, without interference from direct sunlight and to extend the life of the devices.

Made of white plastic to reflect sunlight and minimize sensor heating.

Its design allows air circulation and helps avoid direct sunlight radiation ensuring that the sensor is exposed to real environmental conditions.

Data sheet

Request a quote, a technical consultation or product information

Other sensors

DCLN3E

Load cell for strain measurement on 3 axes, design-based average range, output signal 2 mV/Vx axis

Weather vane-420-M12

Wind direction sensor for industrial use, with 4-20 mA output signal

DPLVDT-20-xx

LVDT displacement sensor, ranges from 10 to 40 mm, with or without probe, with separate electronics.

BPSE

The BPSE load cell is used to measure compression forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.

DPK400

Rocker rain gauge

IKTR

General purpose displacement sensor, spring loaded probe, ranges up to 200 mm, resistance up to 5 Kohm

ANEMO-PUL.M12

Anemometer with pulse output, proportional to wind speed, industrial use

DPF-MICO2TH32

Indoor CO2, humidity and temperature sensor with RS485 ModBus communication

DR-2xxx

Radar level sensor, range up to 10 meters.

DFI8x0

High precision tilt measurement equipment on 1 or 2 axes, range +-15º, precision 0.005º, resolution 0.001º

DPFQ500D

Field transmitters for measuring concentration of different types of gases. With alarm, light signal and use in ATEX zones. For INDOOR - OUTDOOR

DPF-AOCO2

Analog-digital CO2 Controller Sensor, with ModBus RS485 communication, for OUTDOORS

AQUA-RTD-minidis

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.

xPT-xxx

Indoor or outdoor wall-mounted temperature sensors, with Pt100 signal, 4-20 mA, 0-10 Vdc, with or without display

AQUA-RTD-IN-minidis

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger + display.

DNM

Float level sensor, magnetic technology.

TSM-xx

Precision tilt sensor with ranges from ±1...90º, 2 axes, output signal 4-20mA / 0-5 Vdc / RS485 / CanBus, ACCURACY: ±0.005º, RESOLUTION: 0.001º

HPS-L

Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

CTC

Universal traction-compression load cell, from 15 to 5000 kg. 2 mv/v.

DPF-MIC02

NDIR sensor CO2 controller (4000 ppm) RS485 output with LED signaling

DPLVDT-08-xx

LVDT displacement sensor, pencil type, 8 mm diameter, repeatability better than 1 micron, ranges 2.5, 5 and 10 mm.

DPK402

Rain and/or snow detector

DRFI

Radar level measurement for dams and open channels

DP-095

Anti-solar radiation protector

SDTxx

Range of resistive displacement sensors, with different mounting options, with a range from 10 mm to 200 mm.

XCA-xx-x

INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.

DPF-MITH

Indoor humidity and temperature sensor with RS485 ModBus communication

HPS-Sxx

Wire displacement sensor, miniature size, ranges 250, 500, 750, 1000 mm

DRUE

Ultrasonic level sensor, range up to 10 meters, output signal RS485/ 4-20 mA / 0-5 Vdc.

DP 100.xx

Wind speed sensor, industrial anemometer made of metal or carbon fiber, with different types of output signals

TSC-xx

INCLINOMETER RANGE (±) 10°/30°/60° /90°/ To be specified, 1 or 2 axes, ACCURACY: ±0.02º, RESOLUTION:0.05º

DKF39x

The DKF39x accelerometer is a sensor that can be used in many fields, such as vibration monitoring and impact testing. With up to three axes, the output signal can be mA, Vdc, and RS485 communication.

TPS30

Submersible pressure level sensor, up to 150 meters of water column

DPF-CO2-ANCO2L

Indoor CO2 sensor, range up to 4000 ppm, analog output and relay alarm

IPKM-XX

Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.

TRH022

Temperature and humidity transmitter. For ambient and duct. Output signal 4-20 mA, 0-10 vdc and RS485

PE-01

Static torque sensor, ranges up to 10000 Nm, with 2mv/v output signal

DPF-MOCO2TH

CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication

ALCC-xx

Tilt sensor for platform control, 1 or 2 axes, programmable alarm range, range +-15º, accuracy 0.1º, 1Amp contact, NC or NA, 24 Vdc power supply, IP67

DFI4x0

Equipment for measuring inclination in 1 or 2 axes, color LCD screen, battery or USB powered, range +-90º, accuracy 0.05%, magnet fixing.

CV-0x Flowmeter

Vortex flowmeter with temperature and pressure compensation

AQUA LUX-xxx family

Luminosity sensors (luxometers) for industrial and home automation use

DPK300.x

Dust concentration sensor

DPK210-xxx

Illuminance sensor, luxmeter, measuring range: 0-2000lux / 0-20klux / 0-200klux

ANEMO-Relay.M12

Anemometer with direct alarm output (adjustable) with relay switching contact. Also available with 4...20 mA output.

TPH SERIES

Industrial pressure sensor, -1.0 /…2.5 /0…6 /0…10 /…16 /0…25 /0…60 /… 100 /…250 /…400 /….600 Bar, 4-20 mA output, via M12 connector, 1/4" thread

IKTC

Industrial resistive displacement sensor, range from 50 mm to 1250 mm

TDC-xx-x

TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g

HPS-S

Wire displacement sensor, ranges from 100 mm to 1250 mm, with 5 Kohm resistance output signal, 0-5/10 Vdc, 4-20 mA, RS485 or pulse, optionally with IP67 environmental protection. Robust

TPM61

Industrial pressure gauge, range up to 600 bar, 4-digit LCD

DPK-401

Optical rain sensor

IKPM

Displacement sensor range from 10 to 100 mm, with and without spring probe, IP67

DPF EE160

Combined humidity and temperature sensor, high quality sensor, duct and outdoor.

DPFS-xxx

Compact ultrasound stations, RS485 ModBus communication

ECM33-C

SENSORS FOR EDDY CURRENT DISPLACEMENT MEASUREMENT, RANGES 1-2-4-5 mm, output signal 4-20 mA - 0-10 Vdc, RS485

TPD710

Differential pressure transmitter. Measuring range up to 3MPa (30 Bar)

HPS-SXXX

Wire displacement sensor, miniature size, ranges from 100 to 350 mm

Temperature sensors with “S” cable

Range of temperature sensors with cable output, Pt100, Pt1000, thermocouples, NTC, PTC.

TST-xx

Industrial inclinometer. Range 10º to 360º, 1 and 2 axes, Output signal 0.5-4.5 Vdc. / 4...20 mA, CAN / RS485/ TTL / 422, Power supply 9...36 Vdc, IP67, Working temp. -40...+85ºC, accuracy ±0.2º

HPS-SX

Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

HPS-LX

Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses

OFI-RTD-IN-minidis

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

DPF-CO2-SCF

Indoor CO2 sensor, range up to 4000 ppm, analog output and digital alarm

HPS-M

Wire displacement sensor, ranges from 1000 mm to 4000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

DP330.xx

Temperature, humidity and/or atmospheric pressure sensor

DP 110.xx

Wind direction sensor

DPK204

Solar radiation sensor, pyranometer

RTP-001

Adjustable industrial thermostat.

TXM-xx

HIGH PRECISION RANGE ±1...90º, 2 axes, output signal 4-20mA / 0-5 Vdc / Rs485 / CanBus, PRECISION: ±0.005º, RESOLUTION: 0.001º

TCA-xxx

Inclinometer with RS485 output, temperature-compensated, high precision. 1 or 2 axes. Temperature-compensated.

DPF-AN3CO2THL

Analogue-digital CO2, humidity and temperature controller sensor with LED signalling and relay alarm, for indoor use.

DP 120

Combined wind speed and direction sensor

OFI-RTD-IN

Wall temperature sensor with Pt100 sensor, built-in Data Logger.

DKF39x

Accelerometer with 3 axes, the output signal can be in mA, Vcc and RS485 communication

AQUA-RTD-IN

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in Data Logger, with probe.

DPF-AN2TH

Analogue-digital humidity and temperature controller sensor with LED signalling, relay alarm, for indoor use.

We are sure that we can help you

Request a quote without obligation, do the necessary technical consultations or request information about our products.